One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

MANAGER: VEHICLE SYSTEMS ENGINEERING

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $84K - $119K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking a Systems Engineering Manager in charge of logic and software Engineering departments for manufacturer of heavy trucks. Will be responsible for coordination and implementation of all system and software endeavors in the production of heavy trucks. Will oversee the departments that research, develop, design, and test electrical, electromechanical, hydraulics and software control systems for heavy trucks.

 

 REQUIREMENTS:

  • B.S. degree in Electrical Engineering, Computer Engineering or similar Engineering discipline and 6 years of work-related experience

            OR

  • A.S. degree with 8 years of work-related experience or equivalent combination of education and experience
  • At least 2 years of supervisory experience
  • Heavy equipment or mining equipment experience preferred, but not required
  • Extensive knowledge of the design, specification, and use of PLC control on mobile equipment
  • Strong software experience
  • Prior strong leadership experience and current leadership role 
  • Ability to encourage team spirit, customer focus, integrity, and promote safety
  • Knowledge of software programming tools such as CoDeSys, C++, etc.
  • Ability to optimize, troubleshoot, and validate software code
  • Communication protocols such as RS232, CanOpen, J1939
  • Diagnostic and validation tools for verification of software stability and function
  • Ability to write specifications to describe software function
  • Knowledge of communication networks and vehicle communication bus architecture
  • Signal processing techniques
  • Knowledge of all major truck systems and interaction among drive, control, hydraulic, and mechanical systems.
  • Knowledge of electrical drive systems with respect to heavy trucks, especially Diesel-electric heavy trucks
  • Project Management tools, such as MS Project
  • Knowledge of BaaN system with respect to truck BOM structure and inventory control
  • Ability to read and write electrical and hydraulic schematics
  • Able to apply mathematical concepts, i.e. exponents, logarithms, quadratic equations, and permutations
  • Able to apply mathematical tasks such as frequency distribution, test reliability and validity, analysis of correlation techniques, and sampling theory 
  • Will be traveling nationally and internationally up to 20% of the time
  • Valid driver's license
  • Able to obtain a passport
  • Able to obtain Mine Safety & Health Administration certification (MSHA)

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

FRONT DESK RECEPTIONIST

A TEMP-HIRE POSITION after 30 Days

INDUSTRY:  EMPLOYMENT / STAFFING / PERSONNEL SERVICES

LOCATION: NEWPORT NEWS, VA

PAY RATE: $ 10-13 per hour

  

SUMMARY:

Provides general office support with a variety of clerical activities and related tasks. Responsible for answering incoming calls, directing calls to appropriate associates, mail distribution, flow of correspondence, as well as additional clerical duties.

 

RESPONSIBILITIES:

  • Answers telephones and directs the calls to the appropriate associate. Will transfer a caller to an associate's voicemail when the associate is unavailable.
  • Greets and directs applicants and visitors to the company
  • Will take and retrieve messages for various personnel
  • Provides callers with information such as company address, directions to the company location, fax numbers, website, registration information and other related information
  • Receives, sorts and forwards incoming mail. Maintains and routes incoming faxes
  • Coordinates the pickup and delivery of express mail services (UPS)
  • Compose, type, and edit correspondence, reports, memoranda, and other material
  • May also assist with other related clerical duties such as copying, scanning, filing, and the HR Database maintenance

 

REQUIREMENTS:

  • High school diploma or equivalent (GED) required
  • 6 months to 1 year of relevant experience and/or training, or equivalent combination of education and experience

 

 EOE M/F

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

GENERAL MAINTENANCE MANAGER: STEEL PLANT

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: STEEL PROCESSING

LOCATION:  MOBILE, AL

SALARY RANGE: $150 K- $155 K

  

SUMMARY:

Responsible for overall Plant Maintenance and budget management, working with Manufacturing Maintenance Managers and respective General Managers.

  • Health, Safety and Environmental responsibilities, incl. implementation, adherence, and improvements to Health and Safety standards and personnel behaviors to ensure a safe working environment.
  • In charge of Central Maintenance Organization, incl. centrally managed assets, field teams, and plant maintenance contracting.
  • In charge of overall plant reliability, incl. maintenance work management. Will lead Area Managers of Central Maintenance directly and Area Managers of the manufacturing units indirectly. All are jointly responsible for the effectiveness and efficiency of the plant maintenance function. 

REQUIREMENTS:

  • B.S. degree in Engineering, Science or related field
  • 15 years of work-related experience in manufacturing operations or maintenance
  • 3 years in capacity of Manager
  • Broad understanding of the Steel Industry with its related technology and market trends.
  • Able to manage and develop maintenance and operating personnel and organizations
  • Proven track record in organizational leadership and results orientation
  • Extensive knowledge of change management and communication methodologies
  • Management skills, especially in planning and development of processes, systems and personnel

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CONVENTIONAL MACHINIST

TEMP-HIRE after 90 Days

INDUSTRY: AEROSPACE

LOCATION: NEWPORT NEWS


 

SUMMARY:

Set up and operate a variety of machine tools such as Lathes, Milling, Shapers, Planers, Precision Grinders to make parts, mechanisms, machines, to exacting tolerances. Interpret Blueprints, Sketches, Engineering Specifications.

 

REQUIREMENTS:

  • Minimum 2 years of experience operating manual lathe and mill 
  • Minor CNC Machining experience
  • Ability to read blueprints
  • Own tools required

EOE     M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PUMP MECHANICS

2 TEMP-HIRE POSITIONS (after 90 days) 

INDUSTRY: MACHINE SHOP

LOCATION: CHARLESTON, SC

PAY RATE: $18-20 /HR

 

BRIEF DESCRIPTION:

  • Must have experience with Vertical Turbine Pumps (usually found in Power Plants)
  • Experienced with inspection using micrometers & calipers, failure analysis and assembly 

            OR experienced with hand and pneumatic tools and good mechanical aptitude

  • Disassemble and rebuild pumps
  • Pull specs and work items
  • Read Blueprints
  • Research drawings and APL Drawings
  • Must be able to perform field work for removals and installations

 

EOE  M/F

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CMM  DIMENSIONAL INSPECTOR

A TEMP-HIRE POSITION

INDUSTRY: MACHINE SHOP

LOCATION: NEWPORT NEWS

 

 

SUMMARY:

Inspect machined parts on a manual CMM. Perform surface plate inspection setups. Use standard measuring tools and Optical Comparator to manually inspect parts as required. 

REQUIREMENTS:
--Experience with Dimensional Inspection
--CMM Experience. Must be computer literate with ability to document CMM and manual inspection results using a PC
--Must be knowledgeable of ANSI Y14.5 and ISO 9002

 

EOE   M/F
 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

AUTOMOTIVE TECHNICIANS with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days)

LOCATION: WILLIAMSBURG, VA

PAY RATE: $26.20 per Hour, which includes Health Insurance Benefits 

Day Shift, 40 hours per week, with minimal overtime

 

 SUMMARY:

Serve as Automotive Technician on passenger carrying vehicles, trucks, and trailers of all sizes. service, repair, and overhaul various types of vehicles.

 

REQUIREMENTS:

  • High School diploma or equivalent with minimum 3 years of related experience
  • Must have experience working on passenger vehicles
  • Read and understand technical manuals
  • Operate forklift trucks, roll back wreckers, flatbed trucks, and other various types of equipment
  • Able to lift up to 50lbs
  • Active Secret Clearance required

 

 

EOE  M/F

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

AUTOMATED MANUFACTURING TECHNICIANS

4  TEMP-HIRE POSITIONS

INDUSTRY: MANUFACTURING

LOCATION: TOANO (Greater Williamsburg Area)

PAY RANGES: 

1st Shift: 61m-2pm, rotating shift, must be avail. Monday-Sunday      $11.50/hour

3rd Shift: 10pm-6am, rotating shift, must be avail. Monday-Sunday       $11.75/hour

Able to work overtime 

 

SUMMARY:

 
Seeking Manufacturing Technicians in Toano that are able to work well with small materials and have good attention to detail. 

 

REQUIREMENTS: 

  • Prior experience working in a manufacturing setting
  • Ability to lift 75lbs repeatedly
  • Reliable transportation
  • Must take a mechanical aptitude test
  • Pass criminal background check
  • Pass drug screening 

 

EOE M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

QA INSPECTOR (Visual Inspection)

3 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: MANUFACTURING

LOCATION: TOAN0 (Greater Williamsburg Area)

1st SHIFT: 6am-2pm

2nd SHIFT: 2pm-10pm

3rd SHIFT: 10pm-6am

PAY RANGE: $9 - 9.50, depending on shift

 

SUMMARY:

Use gages to inspect product. Work in a fast-paced setting, inspecting 6000+ parts per shift.

 

REQUIREMENTS:

  •    Must have prior manufacturing / assembly experience
  •    Able to work in very fast-paced environment
  •    Must be able to pass mechanical aptitude test
  •    Able to pass background check

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING PLANNER: STRUCTURAL STEEL

A DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RANGE: $55K - $70K

Generous Relocation Assistance is Available. 

 

SUMMARY

Plan, prepare, and issue production schedules for Structural Steel, Heavy Steel manufacturing processes through fabrication, incl. welding. Create master schedule for sequence of each operation to meet shipping dates according to customer orders. Schedule workflow for each department and manufacturing operation. Plan fabrication, paint and assembly sequence to ensure timely completion of production orders. Utilize Logistics and Warehouse software and ERP system and train end users. Utilize nesting software. Read and interpret engineering drawings. Ascertain availability of parts and correct shortages. Assist with managing inventory for fabrication and assembly. Initiate Engineering Change Requests and update Bills of Material. Participate in continuous improvement projects.

 

REQUIREMENTS:

  • B.S. degree and 4 years of related work experience
  • Must have strong Heavy Steel Fabrication experience. Manufacturing Engineer/Planner background
  • Will also consider a Manufacturing Engineer with supply chain concentration, heavy steel/welding, and SAP background
  • Ability to read blueprints
  • Knowledge of weld symbols and bevels.
  • Nesting software required
  • AutoCAD experience or similar
  • Knowledge of inventory software and order processing systems
  • Knowledge of Project Management software, MS Word and Excel spreadsheets
  • Math skills: percentages, circumference, and volume. Knowledge of basic algebra and geometry.
  • Strong oral and written communication skills
  • Knowledge of manufacturing processes such as planning, bill of material, shop floor monitoring, and costing.
  • Experience Enterprise Resource Planning (ERP), Engineering Data Management (EDM), and Warehouse Management System (WMS) a plus
  • AIPICS CPIM certification preferred but not required
  • Up to 10% overnight travel, domestic and international
  • Must be able to obtain valid driver's license and passport
  • Clean background
  • Ability to pass drug test

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCT DEVELOPMENT ENGINEER: VEHICLE SYSTEMS

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $68K - $116K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking a Systems Engineer familiar with how vehicle systems work together and integrate. Will research, develop, design, and validate mechanical, electrical, and hydraulic hardware and related control logic for use in heavy trucks.

  • Develop mechanical, hydraulic, and electro-mechanical systems for use in heavy trucks
  • Conduct system simulations and calculations
  • Create schematics for mechanical, hydraulic, and electro mechanical systems
  • Interface with Mechanical, Hydraulic, Electrical, and other disciplines to specify control components such as PLC's, computing platforms, HMI, and other associated hardware
  • Estimate time and cost required to develop and serially produce heavy truck systems
  • Develop detailed plans for tests and validation at the component and system level

 

 REQUIREMENTS:

  • B.S. degree in Mechanical Engineering, Electrical Engineering, or Mechatronics and 3-5 years of work-related systems engineering experience in an engineering environment

            OR equivalent combination of education and experience

  • Knowledge of mechanical and electro-mechanical systems
  • Able to mathematically model mechanical, hydraulic, and basic electrical systems
  • Knowledge of automated control
  • Able to create schematics to depict system operation and design
  • Familiarity with system modeling techniques and Matlab/Simulink or comparable simulation software
  • Will be traveling nationally and internationally up to 20% of the time
  • Valid driver's license
  • Able to obtain a passport
  • Able to obtain Mine Safety & Health Administration certification (MSHA)

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SYSTEMS ENGINEER: AUTONOMOUS VEHICLE DEVELOPMENT

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $62K - $100

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking a Systems Engineer to develop mechanical, hydraulic, and electro-mechanical systems for use in heavy trucks

  • Conduct system simulations and calculations
  • Create schematics for mechanical, hydraulic, and electro mechanical systems
  • Interface with Mechanical, Hydraulic, Electrical, and other disciplines to specify control components such as PLC's, computing platforms, HMI, and other associated hardware
  • Estimate time and cost required to develop and serially produce heavy truck systems
  • Research and analyze customer design proposals, specifications, manuals
  • Collaborate with Engineers and other staff to develop operating procedures and resolve system malfunctions
  • Develop detailed plans for tests and validation at the component and system level

 

 REQUIREMENTS:

  • B.S. degree in Mechanical Engineering, Electrical Engineering, or Mechatronics and 2-3 years of work-related systems engineering experience in an engineering environment

            OR equivalent combination of education and experience

  • Knowledge of technical fundamentals of robotics and/or autonomous systems
  • Knowledge of industrial hydraulics
  • Knowledge of mechanical and electro-mechanical systems
  • Ability to mathematically model mechanical, hydraulic and basic electrical systems
  • Able to create schematics to depict system operation and design
  • Familiarity with system modeling techniques and Matlab/Simulink
  • Ability to write specifications describing system function and logic
  • Will be traveling nationally and internationally up to 20% of the time
  • Valid driver's license
  • Able to obtain a passport
  • Able to obtain Mine Safety & Health Administration certification (MSHA)

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

COST & VALUE ENGINEER

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $80K - $90K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking an Engineer, preferably trained in Mechanical, Software, or Cost Accounting areas to analyze cost and value with respect to research, plan, and design of Heavy Equipment and its mechanical, thermal, and hydraulic components and systems. The Engineer will coordinate activities with team members from Engineering, Purchasing, Fabrication, Assembly, and Manufacturing Engineering.

 

 REQUIREMENTS:

  • Bachelor's degree in Mechanical Engineering, or related Engineering discipline OR 6+ years related experience and/or training
  • Knowledge of mechanical and general engineering
  • Experience with Cost Controlling and Manufacturing processes
  • Manufacturing or Design experience (automotive industry background desirable).
  • Understanding of FEA analysis and material properties
  • Knowledge of database software
  • AutoCAD, Pro-Engineer Design software, MS Project, and MS Office software
  • Knowledge of BaaN system with respect to BOM (Bill of Material) structure and inventory control
  • Ability to read and interpret schematics, part drawings, assembly drawings, component / system specifications and Government regulations.
  • Understanding of probability and statistical inference
  • Ability to apply mathematical concepts such as fractions, percentages, ratios, and proportions
  • Abilities in planning, managing, and directing resources
  • Very organized, methodical, analytical
  • Good at using and manipulating spreadsheets
  • Some Cost Accounting Experience desirable
  • Valid driver's license
  • Able to obtain a passport
  • Able to obtain Mine Safety & Health Administration certification (MSHA)

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CONVENTIONAL MACHINISTS

2 TEMP-HIRE POSITIONS, after 90 Days

INDUSTRY: MACHINE SHOP

LOCATION: CHARLESTON, SC

 

SUMMARY:

Seeking a Conventional Machinist wit large piece experience, to work mostly with lathes and working on shafts.  

 

REQUIREMENTS:

  • Minimum 3 years of experience operating manual lathe and mill
  • Experience with large pieces such as shafts
  • Ability to read blueprints
  • Own tools
  • Must pass background check

EOE   M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

TIG WELDER

A TEMP-HIRE POSITION

LOCATION: CHESAPEAKE

HOURLY PAY RATE: $18-20

Job Requirements:

Must be very skilled in Mig and Tig Welding techniques. Emphasis is on Light Gauge Metal. Able to read blueprints. Will be working in a machine shop setting, producing parts according to Government specifications. Several years of machine shop experience required.

 

 

EOE   M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

ANALYSIS & SIMULATION ENGINEER SR: Structural / Mechanical

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $80K - $110K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking a Senior Analysis & Simulation Engineer to conduct advanced structural and mechanical analysis of heavy equipment in the mining industry. Will use FE (Finite Element) analysis, multi-body dynamic simulation, and fatigue analysis.

 

 REQUIREMENTS:

  • Bachelor's degree in Mechanical Engineering or related engineering discipline and 6 years of related experience or equivalent combination of education and experience. Advanced degree preferred.
  • Able to provide leadership in area of structural durability of mining equipment
  • Knowledge of metal fatigue theories and applications
  • Knowledge of and experience with fatigue of welded joints and castings designed to carry variable loads
  • Experience with FEA preferably (Creo Simulate and Ansys)
  • Experience with durability commercial software (preferably LMS and HBM DesignLife)
  • Test data processing experience
  • Knowledge of vehicle dynamics
  • Ability to travel domestically and internationally up to 10% of the time
  • Driver's license and ability to obtain passport
  • Able to obtain Mine Safety & Health certification (MSHA) hazard training

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CELL OPERATORS: PRODUCTION

4 DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RATE: $17.86 per Hour 

Must be willing to work day and night shifts as required

 

SUMMARY:

Cell operating and Setup involve daily operation and troubleshooting of complex operations assembly and test equipment in a fast-paced manufacturing plant.

 

 REQUIREMENTS:

  • High school diploma or GED required
  • Minimum 2 years of work experience in operation and troubleshooting of automated manufacturing equipment
  • Must be computer literate and proficient with keyboard
  • Good written and verbal communication skills
  • Able to utilize basic shop floor math and basic writing skills to prepare shop floor reports and data input sheets
  • Proficient in basic Metric to English unit conversions
  • Manual dexterity and visual acuity
  • Able to use basic hand tools and simple troubleshooting equipment such as multimeter
  • Working knowledge of SPC (Statistical Process Control) desirable
  • Must be able to read and work from blueprints, engineering drawings using geometric dimensioning and tolerancing
  • Able to work from basic electrical, pneumtic, and hydraulic schematics to troubleshoot automated assembly and test equipment
  • Basic understanding of PLC systems and ladder logic desired, but not required.

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MACHINE OPERATORS: MANUFACTURING

3 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: MANUFACTURING

LOCATION: WILLIAMSBURG

PAY RANGE: $9.25 - $10.25

First Shift:           6am-2:30pm

Second Shift:      2pm - 10:30pm

Third Shift:           10:30pm-6:30am  

 

SUMMARY:

 

Load and unload lapping machines, maintain cleanliness of machines and tooling, perform minor calculations and basic data entry. Skilled position with a lot to learn.

REQUIREMENTS: 

  • Prior Manufacturing experience
  • Experience as Machine Operator  
  • QA Inspection experience
  • Attention to detail is a must
  • Willingness and ability to learn

EOE M/F

 


To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINIST / PROGRAMMER

A TEMP-HIRE POSITION (after 90 days)

INDUSTRY:  AEROSPACE 

LOCATION: NEWPORT NEWS

PAY RANGE: $23-30 per Hour 

 

 REQUIREMENTS:

  • Minimum 5 years of CNC experience
  • Ability to both write and edit programs
  • Must have experience and working knowledge of CAM software
  • Able to read and understand blueprints/drawings

Preferred:

  • Experience with horizontal and vertical mills
  • Experience with MasterCAM software and FANUC controls

 

EOE M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINISTS: PRODUCTION

2 DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RATE: $19.20 per Hour 

Must be able to work nights and weekends:  7pm-7am. Will train on day shift and then transition to nights.

 

SUMMARY:

Responsible for day-to-day operation and troubleshooting of metal machining equipment and processes used to produce precision components for assembly into various products manufactured in the plant.

 

 REQUIREMENTS:

  • High school diploma or GED required
  • Minimum 2 years of work experience in operation and troubleshooting of metal turning and fabrication equipment
  • Experience with automatic screw machines is desirable
  • Able to utilize basic shop floor math and basic writing skills
  • Proficient in basic Metric to English unit conversions
  • Working knowledge of SPC (Statistical Process Control) desirable
  • Must be able to read and work from blueprints, engineering drawings using geometric dimensioning and tolerancing

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING ENGINEER, Assembly & Welding Processes

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $60K - $90K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking a Mid-Level or Entry-Level Manufacturing Engineer who will participate in all functions in the facility to support the manufacture and assembly of heavy industrial products and the development of processes and equipment for new products and improvement in the overall product delivery system. Will be working in Assembly area, so fastening, root cause analysis, process flows will be important tasks. Will work in a small group setting on diverse projects.

 

 REQUIREMENTS:

  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering or similar discipline
  • 2 years of Prior Manufacturing or Plant experience preferred, but will also consider no experience
  • Proficiency in MS Office Products
  • Strong background in Assembly and Fastening operations
  • Knowledge of Welding Processes
  • Knowledge of heavy equipment manufacturing processes
  • Ability to calculate and plan manpower and equipment utilization
  • Able to plan and manage projects and schedule and organize employees and their tasks
  • Able to meet productivity standards
  • Math skills: able to calculate discounts, interest, commissions, percentages, circumference, and volume
  • Apply basic algebra and geometry
  • Must have CAD knowledge/experience to perform tooling drawings
  • ProEngineer or 3D design software knowledge a plus
  • Must have driver's license
  • Able to obtain a passport
  • Able to obtain Safety certification (MSHA hazard training

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SYSTEMS ENGINEER 2: HIL

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY: up to $95K

Relocation Assistance Offered 

 

SUMMARY:

Will research, design, develop, and operate HIL (Hardware In Loop) systems to validate mechanical, electrical, and hydraulic PLC software and related control logic for heavy equipment.

  

REQUIREMENTS:

  • B.S. degree in Computer Engineering, Mechanical Engineering, Electrical Engineering, or Mechatronics
  • 2 years of experience with Hardware In Loop (HIL) system engineering experience in an Engineering environment, or equivalent combination of education and experience
  • Knowledge of HIL system architecture and hardware solutions
  • HIL system software tools such as dSPACE Control Desk, Automation Desk, and Synect
  • Knowledge of embedded systems/PLC for testing and debugging
  • Ability to design and develop plant models, test scenarios, and HIL automation scripts
  • System modeling and Matlab/Simulink experience
  • Ability to create schematics for system operation and design
  • Experience with Project Management software, e.g. MSProject
  • CAD and 3D modeling software, preferably Creo
  • Knowledge of algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Knowledge of fractions, percentages, ratios
  • Excellent communication skills
  • Ability to travel nationally and domestically 20% of the time
  • Must have valid driver's license and ability to obtain passport

 

 

EOE  M/F 

 


 

 

 

        

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

ENGINEERING TECHNICIANS

2 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: MANUFACTURING

LOCATION: WILLIAMSBURG

PAY RANGE: $16-24 per Hour

Work Hours: 8am-5pm



SUMMARY:

Seeking Engineering Technicians with a background in mechanical abilities, machining, programming, electrical. Relevant experience can qualify in lieu of a degree. Mechatronics experience or coursework would be ideal.


EOE  M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

X-RAY OPERATOR: INDUSTRIAL

A TEMP-HIRE POSITION (after 90 days) 

INDUSTRY: MANUFACTURING

LOCATION: TOANO (Greater Williamsburg Area) 

PAY RATE: $11.50 per hour 

2nd shift: 2pm-10pm, Mon-Sunday

3rd Shift: 10pm-6am, Monday-Sunday

 Extensive overtime  

 

SUMMARY: 

Seeking an X-ray Operator who has experience working within an industrial environment.

 

REQUIREMENTS: 

  • High school diploma or trade certification
  • Strong mechanical aptitude
  • High attention to detail
  • Willingness to work overtime
  • Computer skills
  • Reliable transportation
  • Pass aptitude test
  • Clean background
  • Pass drug screening 

 

EOE  M/F 


Must-have Qualifications:





To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCTION PLANNER: STRUCTURAL STEEL MANUFACTURING

A DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RANGE: $55K - $75K

Generous Relocation Assistance is Available. 

 

SUMMARY

Plan, prepare, and issue production schedules for Structural Steel, Heavy Steel manufacturing processes through fabrication, incl. welding. Create master schedule for sequence of each operation to meet shipping dates according to customer orders. Schedule workflow for each department and manufacturing operation. Plan fabrication, paint and assembly sequence to ensure timely completion of production orders. Utilize Logistics and Warehouse software and ERP system and train end users. Utilize nesting software. Read and interpret engineering drawings. Ascertain availability of parts and correct shortages. Assist with managing inventory for fabrication and assembly. Initiate Engineering Change Requests and update Bills of Material. Participate in continuous improvement projects.

 

REQUIREMENTS:

  • B.S. degree and 4 years of related work experience
  • Must have strong Heavy Steel Fabrication experience. Manufacturing Engineer/Planner background
  • Will also consider a Manufacturing Engineer with supply chain concentration, heavy steel/welding, and SAP background
  • Ability to read blueprints
  • Knowledge of weld symbols and bevels.
  • Nesting software required
  • AutoCAD experience or similar
  • Knowledge of inventory software and order processing systems
  • Knowledge of Project Management software, MS Word and Excel spreadsheets
  • Math skills: percentages, circumference, and volume. Knowledge of basic algebra and geometry.
  • Strong oral and written communication skills
  • Knowledge of manufacturing processes such as planning, bill of material, shop floor monitoring, and costing.
  • Experience Enterprise Resource Planning (ERP), Engineering Data Management (EDM), and Warehouse Management System (WMS) a plus
  • AIPICS CPIM certification preferred but not required
  • Up to 10% overnight travel, domestic and international
  • Must be able to obtain valid driver's license and passport
  • Clean background
  • Ability to pass drug test

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SEWING MACHINE OPERATORS

2 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: MANUFACTURING 

LOCATION: NEWPORT NEWS 

PAY RANGE: $ 11 - 12 per Hour 

 

REQUIREMENTS:

Must have experience operating a commercial sewing machine.

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

2 TEMP-HIRE POSITIONS

Second Shift: 3pm-11pm

Third Shift:    11pm - 7:30am

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS (DENBIGH)

PAY RATE: $12.50 per hour (Can be increased to $13.50 or $14 when hired permanently after 90 days)


REQUIREMENTS:
--Must have Forklift and Crown Lift (Reach Truck) experience
--Must be willing to work overtime

--Must have stable work history 

--Must be willing to work any shift 

--Warehouse experience required
--Must be willing to work overtime
--Willing to work in a freezer environment: Freezer gear will be provided.
--Must have reasonably clean background

 

EOE M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING ENGINEER: EXTRUSION PROCESS

A DIRECT-HIRE POSITION with Excellent Benefits

LOCATION: HAMPTON

SALARY: $85K or higher

 

SUMMARY:

Will be responsible for the manufacturing processes and testing related to flouropolymer extrusions. Provide technical guidance and hands-on expertise to ensure optimal performance. Implement and apply lean principles and techniques utilizing Lean and Six Sigma tools to improve the process and keep cost at a minimum. 

 

REQUIREMENTS:

  • B.S. degree in Mechanical Engineering, Chemical Science, or Manufacturing Engineering
  • 5-7 years of related experience. Must have experience as Manufacturing Engineer.
  • Lean Manufacturing certification a plus
  • Must have plastics industry experience related to high precision extrusion and processing, preferably with fluoropolymers.
  • Experience in one of the following: thermoplastic polymers, film lamination and surface coating.
  • Knowledge of equipment for film extrusions, stretching/orientation equipment, cable braiders and metalizers.
  • Experience with dimensional inspections and related equipment.
  • Knowledge of data acquisition and control systems.
  • Ability to troubleshoot and analyze manufacturing processes and production equipment
  • Lean Manufacturing Practices & Methodologies (Kaizen, 5S, Value Stream Mapping).
  • Knowledge of algebra, trigonometry, calculus and statistics
  • Knowledge of MRP, CAD, IMPACT and process control software
  • Must be US citizen

 

EOE  M/F 

 

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SOFTWARE DEVELOPER, 2-3

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $80K - $110K 

Relocation Assistance Available 

 

SUMMARY:

Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development in an R&D environment.

 

REQUIREMENTS:

  • B.S. degree in Electrical Engineering or Computer Engineering or Master's degree
  • Minimum 4 years of experience in an engineering environment
  • Previous experience with automated vehicle design highly desired
  • Knowledge of software programming tools, e.g. C++, CoDeSys, etc.
  • Knowledge of communication protocols such as RS232, CanOpen, J1939
  • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Experience applying fractions, percentages, ratios, and proportions to practical situations
  • Able to travel within the US and abroad 20% of the time

 

    EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SOFTWARE DEVELOPER

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $70K - $95K 

Relocation Assistance Available when Applicable 

 

SUMMARY:

Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development.

 

REQUIREMENTS:

  • B.S. degree in Electrical Engineering or Computer Engineering and 2 years of experience in an Engineering environment. (Recent graduates, preferably with Master's degree and related internships will be considered also).
  • Previous experience with autonomous vehicles / automated vehicle design highly desired
  • Understanding of Agile environment is a plus
  • MatLab and Simulink experience
  • Knowledge of software programming tools, e.g. CoDeSys, C++.
  • Knowledge of communication protocols such as RS232, CanOpen, J1939
  • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Research & Development Experience
  • Experience applying fractions, percentages, ratios, and proportions to practical situations
  • Able to travel within the US and abroad 20% of the time

 

    EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

INJECTION MOLDING ENGINEER

A DIRECT-HIRE POSITION with Excellent Benefits

LOCATION: RALEIGH, NC

SALARY: $87K - $102 K

 

SUMMARY:

Introduce Injection Molding process and equipment changes by means of LEAN activities to improve safety, throughput, yield, and cost.

  

REQUIREMENTS: 

  •  BS in Industrial or Manufacturing Engineering or Mechanical Engineering
  •  3-7 years of experience in a manufacturing environment supporting production and introducing new products
  •  LEAN experience required
  •  Exposure to or knowledge of injection molding
  •  Extensive experience with controls, PLC's, and data management
  •  Solid background in Plastics Processing
  •  Experience with Lean Initiatives

 

 EOE  M/F 

 

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

POLYMER PROCESSING ENGINEER: EXTRUSION

A DIRECT-HIRE POSITION with Excellent Benefits

LOCATION: RALEIGH, NC

SALARY: $87K - $102 K

 

SUMMARY:

Introduce process and equipment changes by means of LEAN activities to improve safety, throughput, yield, and cost. Lead Six Sigma projects in the Extrusion and Finishing lines.

 

REQUIREMENTS: 

  •  BS Plastics Engineering preferred (BSME or BS Polymers an option)
  •  5-10 years of experience in a manufacturing environment supporting production and introducing new products
  •  Extrusion/Polymer Processing
  •  Thermoplastics
  •  Die Design 
  •  Lean/Improve Throughput
  •  Creo preferred but other 3d modeling package might be considered
  •  Good at working with engineers of other disciplines

 

EOE  M/F 

 

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PLASTICS ENGINEER: THERMOFORMING

A DIRECT-HIRE POSITION with Excellent Benefits

LOCATION: RALEIGH, NC

SALARY: $87K - $102 K

 

SUMMARY:

Will be tasked to manage a project, introducing a thermoforming process to the plant. Work closely with Product Managers and R&D. Prepare detailed mechanical drawings of molds. Create BoM's, Use SPC to improve thermoforming process.

 

REQUIREMENTS: 

  • BSME or BS Plastics Engineering
  • Minimum 7 years of Experience with heavy gauge plastic thermoforming
  • CAD Design (Creo strongly preferred but other 3 d modeling package is an option)
  • Machine Molds, Prototype preparation experience
  • Project Management, Cost Saving Initiatives, Six Sigma/Lean

 

EOE  M/F 

 

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

DESIGNER: Unigraphics NX

A CONTRACT POSITION, Long-Term, with Temp-Hire Potential

INDUSTRY: AEROSPACE

LOCATION: NEWPORT NEWS, VA

Non-local candidates may be considered.  

 

SUMMARY:

Seeking Designers with 3D Surfacing and Unigraphics experience. Will use Unigraphics NX10 to develop 3D solid models of mechanical components and assemblies

  • Provide CAD models at various stages of the design development
  • Create 3D surface models according to aerodynamic profiles
  • Work closely with Engineering to refine design and solve problems
  • Interact with the Fabrication staff to ensure manufacturability
  • Interact with Programming staff to ensure content of solid model
  • Select standard components for use in the design
  • Perform material selection and sizing of components 

 

REQUIREMENTS:

  • Associate's degree and 3 + years of related experience (aerospace, automotive, or other 3D surfacing experience), or equivalent combination
  • Unigraphics NX strongly preferred
    Solid modeling experience
  • Understanding of GD&T
  • US citizenship required
  • Ability to obtain a security clearance. Strongly prefer DoD clearance in hand.

 

EOE  M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

STRUCTURAL ENGINEER, Level 2

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

Relocation Assistance Available for the right candidate

 

SUMMARY:

Research, develop, design, and test welded structural components and systems used in manufacturing heavy equipment. Research and develop welded structural components and steel castings. Interpret technical drawings, blueprints, and test data. Develop Finite Element (FE) models, perform calculations to determine structural integrity and system loads. Specify raw material types and sizes. Assist the CAD drafters with developing structural designs.

 

 REQUIREMENTS:

  • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology
  • 2 years of Pro-E experience
  • 2 years of Structural Design experience

           OR

  • Associate's degree in Engineering related field
  • 2 years of Pro-E experience
  • 4 years of Structural Design experience

            OR 

  • 2 years of Pro-E experience
  • 7-8 years of Structural Design experience or equivalent combination of education and experience
  • Knowledge of Pro-E, Pro-E Mechanica, CAD and MS Office
  • Ability to plan and direct resources and manage projects
  • Knowledge of algebra, plane and solid geometry and trigonometry; knowledge of probability and statistical inference
  • Knowledge of fractions, percentages, ratios, and proportions
  • Will be required to travel nationally and internationally up to 20% of the time 
  • Must be able to obtain driver's license and passport 

 

 

 

 

 

 

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCTION MACHINISTS

3 TEMP-HIRE POSITIONS

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RATE: up to $25 per Hour   

 


SUMMARY:

Seeking CNC Production Machinists, one for each shift. Must be able to set up machines and change tooling. Must know how to edit codes. Will be using HAAS milling centers only for the manufacture of glass products.

 

 EOE M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MAINTENANCE TECHNICIANS: INDUSTRIAL AUTOMATION

2 DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RATE: $20.80 per hour to start 

Must be willing to work day and night shift as scheduled.


SUMMARY: 

Seeking Maintenance Technicians to install, repair, and maintain automated production equipment and machinery. Must have experience with automation and PLC Programming. Must be available for night shift (night shift is strongly preferred) and must work every other weekend.

 

EOE M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MACHINE OPERATORS: MANUFACTURING

3 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: MANUFACTURING

LOCATION: WILLIAMSBURG

PAY RANGE: $9.25 - $10.25


Second Shift:      2pm - 10:30pm

Third Shift:           10:30pm - 6:30am  

 

SUMMARY:

 

Pick and place glass components into multiple CNC machines.  Requires careful handling of glass components, loading into slotted carriers.  Perform minor visual inspections and basic data entry. 

  

REQUIREMENTS: 

  • Prior Manufacturing experience
  • Experience as Machine Operator  
  • QA Inspection experience
  • Attention to detail is a must
  • Willingness and ability to learn

EOE M/F

 


To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINISTS

2 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: AEROSPACE MANUFACTURER 

LOCATION: NEWPORT NEWS

 

 REQUIREMENTS:

  • 10+ years of machining experience
  • Experience with complex set-ups using 3-5 axis CNC mills, lathes and vertical turning lathes
  • Able to calculate and set up controls for regulation of speeds and feeds
  • Must be able to read blueprints and use applied math
  • Able to operate conventional machines as needed
  • Available to work flexible schedule and overtime as needed
  • Must be able to pass criminal background check

Preferred:

  • High tolerance prototype component experience
  • Ability to run multiple machines simultaneously 

 

EOE M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

APPLICATIONS ENGINEER: AUTOMOTIVE

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NORFOLK, VA

SALARY: $60K - $90K

 

SUMMARY:

The Applications Engineer will support Sales and Marketing of trucks and excavators nationally and internationally. He or she will be the designated corporate expert in mining techniques and the application of the Company's products in the mining industry.  

  • Provide technical assistance to Sales personnel and Customers
  • Visit customer mining sites to make presentations and offer technical assistance
  • Conduct truck haulage simulations using Runge TALPAC software
  • Estimate heavy equipment production rates, haulage, and cost per ton
  • Maintain excavator and truck loading charts
  • Maintain fuel consumption data
  • Offer technical sales training to staff members
  • Support Marketing with development of marketing products, advertising, and promotional materials
  • Participate in mining industry trade shows

 

 REQUIREMENTS:

  • B.S. degree in Mining Engineering (preferred), or B.S. degree in Mechanical Engineering
  • At least 3 years of experience as Applications Engineer in Heavy Equipment Manufacturing. (Entry Level candidates may be considered, if they meet the minimum qualifications)
  • Ability to provide technical assistance in the use or application of Company's products
  • Must have experience using Runge TALPAC mining software (or ability to learn)
  • Must be able to perform truck haulage simulations using Runge TALPAC software
  • Must be able to estimate production rates, haulage, cost per ton
  • Must have an understanding of the mining industry, specifically the surface mining methods
  • Understanding of the application of mining machinery and equipment
  • Knowledge of global sales strategy related to mining equipment
  • Ability to give presentations to staff and customers
  • Develop and present technical training to staff
  • Proficiency in MS Word, Excel, PowerPoint, and Project
  • Knowledge of Project Management software
  • Ability to visit mining sites worldwide
  • Must have driver's license
  • Able to obtain a passport
  • Ability to travel 30% of the time, domestically and internationally for up to 4 weeks at a time.

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CALIBRATION & MEASUREMENT TECHNICIAN

A TEMP-HIRE POSITION

INDUSTRY: MANUFACTURING / MACHINE SHOP

LOCATION: NEWPORT NEWS  

PAY RANGE: $15- $20 per Hour

  

REQUIREMENTS:

  • Must be familiar with calibration of dimensional measuring equipment and hand tools
  • Knowledge of ISO 17025

 

EOE / M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCT MANAGER: ROTATING EQUIPMENT

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: LYNCHBURG, VA AREA

SALARY RANGE: $ 73,180 per year

 

SUMMARY:

Will be responsible for product planning and strategic execution during the product lifecycle. Will gather and prioritize product and customer requirements. Will work closely with Engineering, Sales, Marketing, and Support to achieve revenue, profit, and customer satisfaction goals.

  • Analyze target industries.
  • Perform cost analysis of product lines.
  • Monitor competition and market level pricing.
  • Analyze specific opportunities using marketing tools and concepts.
  • Administer pricing for the product line.
  • Create marketing plans based on available opportunities.
  • Create product launch strategies and manage product launch.
  • Generate reports and presentations outlining marketing plans and results

 

REQUIREMENTS:

  • B.S. degree in Business or Engineering discipline or equivalent experience. 
  • Must have 4 years of experience in product management.
  • Technical knowledge of power transmission products and applications
  • Experience working with project management methodology, incl. budget development, project planning, project management software, finance and accounting concepts and practices
  • Strong knowledge of marketing fundamentals such as marketing mix, segmentation, positioning, targeting and differentiation focused on power transmission.

 

 

EOE M/F

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

APPLICATIONS ENGINEER, Rotating Equipment Experience

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: LYNCHBURG, VA REGION

SALARY RANGE: $ 57,310 per year

 

SUMMARY:

Will be in charge of Project Input and Specifications as well as price control and sales support with the goal of generating professional and high quality proposals for customers' project orders and applications.

  • Create proposals for customers project orders and applications
  • Support Company's external and internal customers seeking application assistance with Company's products and services. 
  • Maximize Company's revenue and profitability while controlling risk exposure on Project Orders
  • Support Marketing and R&D with verification of technical information
  • Lead application training for internal and external customers
  • Assist with process improvements as needed
  • Attend industry and association meetings as Company's applications expert.

 

REQUIREMENTS:

  • B.S. degree in Electrical or Mechanical Engineering or equivalent experience
  • Minimum 5 years of experience in rotating equipment industry
  • Knowledge of Project and Specifications Management
  • Excellent written and verbal communications skills
  • Ability to generate, organize and maintain Project Order documentation and communications at the start of major Project Orders
  • Experience summarizing Project and Applications in the form of reports and presentations.
  • EOE M/F
     

 

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

FIREWATCH 

5 CONTRACT POSITIONS 

Active Secret Clearance Required  

INDUSTRY: SHIPYARD

LOCATION: NORFOLK

 

  • SUMMARY:

    • Watch out for fire hazards in the workplace
    • Keep flammable materials from ignition sources
    • Prepared to operate fire extinguishers
    • Maintain constant means of communication.
    • As much as possible, keep visual and voice contact with other employees.
    • Be prepared to operate fire extinguishers, hydrants, fixed monitors, and hose carts anytime.
    • Return all firefighting equipment to original location

     REQUIREMENTS:

    • Must have active Secret Clearance
    • Able to pass drug test

     

    EOE  M/F 

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    QA INSPECTOR: MACHINE SHOP

    A CONTRACT POSITION with Temp-Hire Potential

    LOCATION: CHESAPEAKE, VA

    PAY RANGE: $18 per Hour, up to $20 for exceptional candidate

     

    SUMMARY: 

    Perform dimensional inspections of machine parts for machine shop. Must have knowledge of calipers, gauges, and micrometers to check dimensions of parts following blueprints. Making sure parts are within tolerance.

     

    EOE M/F 

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    FIREWATCH: FORMER NAVY IDEAL

    5 TEMP-HIRE POSITIONS 

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK

    PAY RANGE: $16-18 per Hour 

     

    SUMMARY:

    • Watch out for fire hazards in the workplace
    • Keep flammable materials from ignition sources
    • Prepared to operate fire extinguishers
    • Maintain constant means of communication.
    • As much as possible, keep visual and voice contact with other employees.
    • Be prepared to operate fire extinguishers, hydrants, fixed monitors, and hose carts anytime.
    • Return all firefighting equipment to original location

     REQUIREMENTS:

    • Must have active Secret Clearance
    • Able to pass drug test

     

    EOE  M/F 

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    notices...

    Now you can join our. . .
    Talent Network
    • Sign up for job alert emails
    • Search by location
    • Apply online
    • Submit your resume