One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

CNC TURRET PUNCH PRESS OPERATORS, 1st and 2nd Shift

2 TEMP-HIRE POSITION after 90 days

INDUSTRY: SHEETMETAL FABRICATION

LOCATION: NEWPORT NEWS

PAY RANGE: $15 - $20 per Hour  

 

SUMMARY: 

Seeking CNC Turret Punch Press Operators able to set up and operate a CNC Turret Punch Press for fabrication of sheet metal products.

 

REQUIREMENTS:

  • Knowledge of turret punch press tooling incl. how to change and maintain
  • Minimum 2-5 years of experience required
  • Experience with light gauge material, average of 0.060 thick, but definitely under 1/8"
  • Proficient in use of precision measuring tools
  • Comprehend blueprints, rough sketches, and customer samples
  • Pass drug screening 


 EOE M/F



Must-have Qualifications:





To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

Outpatient Coder/Auditor/Trainer needed at Newport, RI for Government Contract.

Successful Government Contractor, a nationwide consulting firm specializing in healthcare information management services is currently seeking personnel for this exciting government project on a full-time basis.

Responsibilities: Apply coding classification standards and guidelines to medical record documentation; ensure that all encounter documentation is evaluated for consistency with the nature of the patient encounter (i.e., audit); evaluate occurrences of deficiencies and/or inconsistencies in medical record documentation through the healthcare provider query process, and assist health care providers in proper code selection. The Auditor/Trainer shall specifically be responsible for performing the duties and tasks associated with auditing Government coded outpatient records and providing training each month.

Requirements:
Coder certification may be any of the following based on their required duties: CPC-H, CPC, CCS, CCS-P, RHIT, RHIA

Minimum 1 year of auditing experience within the preceding 2 years.
Possess 1 year of HIM experience in process improvement, data quality improvement, or documentation improvement.

Coder is required to have extensive knowledge of the official ICD-9/10-CM, CPT, MS-DRG, APC, and HCPCS Coding Guidelines for coding and reporting. Contract personnel shall read, understand, speak and write English.

Coding position will require some provider training and minimal travel. Based on previously completed audits, the coder/trainer will follow up on issues or trends found within the documentation of a particular physician for evaluation and further training.

U.S. Citizenship required.

Compensation: Competitive salary,  and excellent benefits!

Please Contact Recruiter for immediate consideration. EOE/M/F/D/V



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Melody Fortune       
eMail a friend about this job

Outpatient Coder   - Groton Naval Base, CT

Seeking experienced credentialed Coder to work on-site.  CPC, CPC-H, CCS, CCS-P, RHIT, or RHIA certification is required. Prior DOD coding experience is desired, but not required. Must be able to work independently and effectively. Excellent  communication skills, attention to detail, and strong computer skills required.  Must be able to satisfy the requirements for a government security clearance.

U.S. Citizenship required.

Compensation: Competitive Salary and excellent benefits to include comprehensive medical, dental, prescription services, 401(k) Plan match, paid leave and more.  EOE/M/F/D/V

Application Details:Send resume, salary requirements and proof of credential to Recruiter



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Melody Fortune       
eMail a friend about this job

SAFETY TECHNICIANS 3

4 CONTRACT POSITIONS

LOCATION: NORFOLK, VA

PAY RATE: $20 per Hour + $80 per Diem for Non-Local Candidates 

Must be available to work 2nd and 3rd shift.

 

REQUIREMENTS:

  • 5 + years of safety experience in ship repair
  • Shipyard Competent Certifications required
  • RapidGate required
  • Computer experience: MS Word, Excel, and Access 

 

 

EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCTION WORKER w. Good Math Skills

DEPT: PRODUCTION CONTROL

INDUSTRY: MANUFACTURING

LOCATION: WILLIAMSBURG

PAY RANGE: $10-11 per hour

Shift: Days (can vary)

TASKS:

    Transfer material between departments

    Issue raw material and rework material
    Keep accurate records

    Print labels with accurate information
    Reconcile inventory

    Handle glass according to Glass handling Procedures
    Perform Monthly Inventories
    Enter data accurately into spreadsheets and databases

REQUIREMENTS:

    Computer literacy (will work in Word, Excel, and Databases)
    Good basic math skills: addition, subtraction, multiplication, division, decimal places, etc.



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

 

BASE STORE CLERK, with Active Secret Clearance: Will be trained

2 TEMP-HIRE POSITIONS (after 90 Days)

INDUSTRY: GOVERNMENT SITE

LOCATION: WILLIAMSBURG

PAY RANGE: $11.04 per Hour

Must be willing to work evenings until 6:30pm

SUMMARY:

Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

  • Operate Base Store in the temporary absence of the Manager
  • Open and closer Store as needed
  • Process incoming and outgoing mail and packages (UPS, FedEx, US Postal Service)
  • Hand out packages and mail
  • Process dry cleaning tickets
  • Food and beverage service preparation
  • Order, receive, and stock merchandise
  • Clear cash register and balance funds
  • Process cash and credit card payments
  • Basic cleaning

REQUIREMENTS:

  • High school diploma or equivalent
  • Able to use calculator and cash register
  • General computer knowledge
  • Able to handle cash and give back correct change
  • Prior retail experience or willing to learn retail, buying, and bookkeeping
  • Strong communication and customer service skills
  • Able to lift up to 70lbs
  • Active Secret Clearance required; must be willing to obtain top secret clearance
  • Must be US citizen
  • Valid driver's license

EOE M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

ADMINISTRATIVE ASSISTANT 2, with HR Experience

A CONTRACT POSITION with Possibility for Renewal

INDUSTRY: SHIPYARD

LOCATION: NEWPORT NEWS

Work Hours: 8am -5pm

 

REQUIREMENTS:

  • High School diploma and 2 years of HR-related experience

            OR currently College Major in HR or Organizational / Industrial Psychology

  • Exposure to Talent Acquisition, Recruitment, and Onboarding
  • Extensive knowledge of MS Office products, incl. Word, Excel and Outlook
  • Must be able to pass background check
  • Must be US citizen

 

  • EOE  M/F

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

INFORMATION SYSTEMS PROJECT MANAGER, Level 5

A 12-MONTH CONTRACT with Possibility for Renewal

INDUSTRY: SHIPYARD

LOCATION: NEWPORT NEWS, VA

PAY RANGE: $40.30 - $56 per hour

 

SUMMARY:

 Lead and direct one or several project teams in the design, implementation, and modifications of IT projects. Ensure that projects are completed on schedule, within budget. Keep informed of advances in the IT field. Provide technical and analytical guidance to the team.

 

REQUIREMENTS:

  • B.S. degree in Science and 14 years of experience

         OR M.S. degree and 12 years of experience

         OR Ph.D. and 9 years of experience.

  • Requires extensive experience with leading and managing IT software development and IT infrastructure implementations.
  • PMI certification highly desired
  • Must be US citizen.

        

EOE M/F 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

WELDING INSPECTOR
Certified Welding Inspection not required

A TEMP-HIRE POSITION

INDUSTRY: MANUFACTURING

LOCATION, TOANO (Greater Williamsburg Area)

 

BRIEF JOB DESCRIPTION:

The welding inspector will be responsible for:

•Visually inspecting welds and fabrications
•Utilize NDT techniques to test the quality of welds
•Read drawings, codes and specifications
•Accurately communicate results of inspections in both verbal and written reports
•Write reports of results of weld tests
•Review drawings and weld symbols and compare to production performed

 

REQUIREMENTS:

•Minimum 2 years of Weld Inspection
•Must be detail oriented and have excellent communication skills

EOE M/F
 







To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

ELECTRICIAN HELPERS: LIGHT INDUSTRIAL

2 or more TEMP-HIRE POSITIONS

INDUSTRY: MANUFACTURING

LOCATION: HAMPTON

 

SUMMARY:

Seeking two or more Light Industrial Electrician Helpers with tools and at least some experience running conduit, preferably ridged conduit.

 

SUMMARY:

  • Own tools
  • Must have some experience running conduit, preferably ridged conduit 

 

 EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CAD DRAFTER, MECHANICAL, Immediate Need

A CONTRACT POSITION for 6 Months

INDUSTRY: AEROSPACE

LOCATION: NEWPORT NEWS, VA

PAY RATE: Based on Experience


 

SUMMARY:

3 D Modeling using Pro E and SolidWorks, preparing drawings of complex Aerospace structures and assemblies.

 

REQUIREMENTS:

  • Minimum 3 years of design experience
  • 3D Modeling experience using SolidWorks and Pro E required
  • Good communication skills and able to work well in a team atmosphere
  • Must be US citizen

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

INTERNATIONAL BUYERS

3 DIRECT-HIRE POSITIONS with Excellent Benefits

LOCATION: NEWPORT NEWS, VA

INDUSTRY: MANUFACTURING

SALARY RANGE: $60 - $75K 

 

JOB SUMMARY:

Coordinate procurement of materials, parts, equipment and supplies for the corporation.

 

REQUIREMENTS:

  • Bachelor's degree in Business Administration / Management or Industrial Engineering or equivalent combination of education and experience
  • Minimum 5 years of material procurement experience in a manufacturing setting
  • International Purchasing experience (not just Federal procurement)
  • APICS (CPIM) certification or equivalent strongly preferred
  • International procurement experience a plus


Competencies:

  • Advanced knowledge of procurement principles, theories and processes
  • Able to work and interact well in a multi-cultural global environment
  • Able to facilitate cross functional teams
  • Able to calculate figures, discounts, interest, commissions, percentages, fractions, ratios
  • MS Outlook, Contract Management systems, MS SharePoint, SAP or BaaN or equivalent ERP system for Order Processing, Inventory, Manufacturing, Cost Calculation system and MS Office
  • Able to read and interpret scientific and technical documents and specifications, financial reports and legal documents

 

-          Strategic Sourcing

-          Commodity Management

-          Commercial discussions/negotiations with suppliers

-          Cost saving

-          Supplier Management

o   Supplier Agreements

o   Supplier Evaluation

o   Supplier Audits

o   Supplier Development

o   Supplier Risk Management

-          Benchmarking or investigating marked trends on materials

-          Identification of cost reduction potential

  

EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

OUTSIDE MACHINISTS, 1st Class

4 CONTRACT POSITIONS

INDUSTRY: SHIPYARD

LOCATION: NORFOLK, VA 

PAY RATE: $20 per hour 


 

REQUIREMENTS: 

  • Minimum 4 years’ commercial / naval experience as a Machinist
  • Must read blueprints, schematics
  • Must have underwater experience
  • Must have own tools
  • Must have RAPIDGate in hand
  • Ability to pass drug screening 

 

EOE M/F 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

FORMICA DECK TILE INSTALLERS w. Secret Clearance

2 CONTRACT POSITIONS

INDUSTRY: SHIPYARD

CITY: NORFOLK 

PAY RANGE: $25 per Hour 

 

Must have experience with Formica. Submarine experience a plus.

 

 

EOE  M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINISTS: PRODUCTION

2 DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

Must be able to work nights and weekends:  7pm-7am. Will train on day shift and then transition to nights.

 

SUMMARY:

Responsible for day-to-day operation and troubleshooting of metal machining equipment and processes used to produce precision components for assembly into various products manufactured in the plant.

 

 REQUIREMENTS:

  • High school diploma or GED required
  • Minimum 2 years of work experience in operation and troubleshooting of metal turning and fabrication equipment
  • Experience with automatic screw machines is desirable
  • Able to utilize basic shop floor math and basic writing skills
  • Proficient in basic Metric to English unit conversions
  • Working knowledge of SPC (Statistical Process Control) desirable
  • Must be able to read and work from blueprints, engineering drawings using geometric dimensioning and tolerancing

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

FORMER MILITARY NEEDED (with Active Secret Clearance)

TEMP-HIRE POSITIONS (after 90 Days) 

INDUSTRY: GOVERNMENT SITE

LOCATION: WILLIAMSBURG

Job Requirements for all Positions:

·  Active Secret Clearance required

·  Must be US citizen

·  Valid driver's license


WAREHOUSE WORKER (with Active Secret Clearance)

PAY RATE: $12.25 per Hour

Former Warehouse or Logistics experience needed. Candidate must agree to submitting an application for a Top Secret clearance within the 90-day temp-hire period before being hired permanently.


HOUSEKEEPERS (with Active Secret Clearance)

PAY RANGE: $9.50 - $10 per Hour

6am-2:30pm, Monday - Friday

A great position because the hours are so steady. An opportunity for former military people going to school or with second jobs. No experience is required, just a willingness to make beds and work as a team!


STORE CLERK, with Active Secret Clearance

PAY RANGE: $11.04 per Hour

Must be willing to work until 6:30pm 

Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

_____________________________________________________________________________________________________________________________________________ 


CULINARY STAFF & PREP COOKS with Active Secret Clearance

5 TEMP-HIRE POSITIONS (after 90 Days) 

PAY RANGE: $10.50 - $14 per Hour DOE

Seeking Culinary Personnel: Cooks I, Cooks II, and Prep Cooks. Will assist the Executive Chef in the preparation and presentation of all meals served in the dining hall and other facilities. Will be responsible for breakfast, lunch, or dinner preparation, set up, replenishing during service and breakdown of the hot entrée line.

 

EOE  M/F 

______________________________________________________________________________________________________________________________________________ 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

DECK TILE INSTALLERS / PCMS INSTALLERS

Several CONTRACT POSITIONS

INDUSTRY: SHIPYARD

CITY: NORFOLK 

PAY RANGE: $ 18-20 per Hour 

 

Must be RapidGate eligible.

 

 

EOE  M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING TECHNICIANS

2 TEMP-HIRE POSITIONS

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS


 

REQUIREMENTS:

  • Associate's degree in Technical field
  • 3-4 years of experience in production maintenance environment
  • Mechanical and electrical troubleshooting skills in repairing and adjusting automated manufacturing equipment
  • Knowledge of Robotics, Pneumatics, Hydraulics, Electricity, Electronics, and PLC's
  • Preferred: 3-4 years high volume automated assembly and test equipment experience

 

EOE M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SHIP FITTERS

10 CONTRACT POSITIONS

INDUSTRY: SHIP REPAIR

LOCATION: NORFOLK 

 

 

REQUIREMENTS:

  • Minimum 5 years of experience in Ship Repair
  • Ability to read and interpret blueprints
  • Tack welding
  • Must have basic hand tools 

 

EOE M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

STORE CLERK, with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days) 

INDUSTRY: GOVERNMENT SITE

LOCATION: WILLIAMSBURG

PAY RANGE: $11.04 per Hour

Must be willing to work evenings until 6:30pm 

 

SUMMARY:

Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

  • Operate Base Store in the temporary absence of the Manager
  • Open and close Store as needed
  • Process incoming and outgoing mail and packages (UPS, FedEx, US Postal Service)
  • Hand out packages and mail
  • Process dry cleaning tickets
  • Food and beverage service preparation
  • Order, receive, and stock merchandise
  • Clear cash register and balance funds
  • Process cash and credit card payments
  • Basic cleaning

 REQUIREMENTS:

  • High school diploma or equivalent 
  • Able to use calculator and cash register
  • General computer knowledge
  • Able to handle cash and give back correct change
  • Prior retail experience or willing to learn retail, buying, and bookkeeping
  • Strong communication and customer service skills
  • Able to lift up to 70lbs
  • Active Secret Clearance required; must be willing to obtain top secret clearance
  • Must be US citizen
  • Valid driver's license

 

EOE   M/F 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

OUTSIDE MACHINISTS with Clearance

10 CONTRACT POSITIONS AVAILABLE

INDUSTRY: NAVY SHIP REPAIR 

LOCATION: HONOLULU, HI

PAY RATE: $29 per hour + $123/day Per Diem plus Travel


     

    REQUIREMENTS: 

    • Must pass a PMI test (Precision measurement: calipers, micrometers, digital and conventional.
    • Submarine experience a big plus
    • Must have active Secret Security Clearance
    • Must be eligible for Rapidgate badge

     

    EOE   M/F

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    OUTSIDE MACHINISTS with Clearance

    10 CONTRACT POSITIONS AVAILABLE

    INDUSTRY: NAVY SHIP REPAIR 

    LOCATION: PORTSMOUTH, NH

    PAY RATE: $29 per hour + $59/day Per Diem plus Travel


       

      REQUIREMENTS: 

      • Must pass a PMI test (Precision measurement: calipers, micrometers, digital and conventional.
      • Submarine experience a big plus
      • Must have active Secret Security Clearance
      • Must be eligible for Rapidgate badge

       

      EOE   M/F

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      MACHINE OPERATORS

      2 Temp-to-Hire Positions (after 90 days)

      Location: Toano, VA (greater Williamsburg area) 

      Industry: Manufacturing

      1st or 2nd shift

      Pay Range: $10.00 - $12.00 per hour

      Overtime available

       

      Seeking Machine Operators in Toano that are comfortable working in a fast-paced environment and able to follow directions.

       

      REQUIREMENTS: 

    • Prior experience operating machines in a manufacturing or shop environment
    • Mechanical aptitude
    • Must have clean background
    • Ability to pass drug screening
    • EOE  M/F


      Must-have Qualifications:





      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      ASSEMBLER

      A CONTRACT POSITION with Temp-Hire Potential

      INDUSTRY: MANUFACTURING

      LOCATION: VIRGINIA BEACH

      PAY RANGE: $12-15 per hour 

      SUMMARY:

      Assemble, test, and modify prototypes or custom manufactured parts, systems, and apparatus: 

      • Read blueprints, shop drawings, shop sketches and follow verbal instructions
      • Align and assemble parts such as brackets, gaskets, hinges and other components
      • Install hardware such as pop rivets, clinch nuts, stud inserts and thread inserts
      • Attach hardware such as nuts, bolts, springs, latches, pins
      • Examine parts for defects, measure performance, determine need for adjustment 
      • Operate drills, impact drivers, rivet guns, and hand tools (wrenches, screwdrivers, sockets)
      • Document information
      • Maintain all tools with basic preventive maintenance
      • Must have own basic tools

       

      REQUIREMENTS:

      • High school diploma plus 1 year of work related experience
      • Must have working experience with blueprints / drawings.
      • Sheet metal fabrication experience very desirable
      • Able to lift up to 40lbs
      • Must have basic tools (wrenches, screwdrivers, sockets, etc.)

      EOE  M/F



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SR. ACCOUNTANT

      A DIRECT-HIRE POSITION

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS, VA

      PAY RANGE: $60K - 70K plus Benefits

       

      SUMMARY:

      Apply the principles of Accounting to analyze financial information and prepare financial reports.

      • Analyze financial information detailing balance sheet accounts
      • Prepare sales tax returns for multiple states
      • Maintain fixed asset system
      • Reconcile bank accounts
      • Analyze accounts payables and material in transit
      • Assist with preparation of balance sheet, profit & loss statements and other reports
      • Help to prepare internal and external audit materials

        

      REQUIREMENTS: 

      • Bachelor's degree in Accounting, Finance, or related field, and 3-5 years of related experience and/or training, or equivalent combination of education and experience
      • Very proficient in Excel and some Access knowledge
      • Public Accounting experience desirable, CPA not required
      • Experience with fixed assets a plus
      • SAGE software experience a plus
      • Knowledge of ERP or SAP systems is a plus
         

      EOE  M/F 



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CULINARY STAFF, COOK I and COOK II, with Active Secret Clearance

      5 TEMP-HIRE POSITIONS (after 90 Days) 

      INDUSTRY: GOVERNMENT SITE

      LOCATION: WILLIAMSBURG

      PAY RANGE: $10.50 - $14 per Hour DOE

      1st Shift: 5:45am - 2:15pm Mon - Fri

      2nd Shift: 11am - 7:30pm Mon - Fri

      Sat, Sun: 7:30am - 7pm

       

      SUMMARY:

      Seeking Culinary Personnel, Cooks I and Cooks II, who possess an active Secret Security Clearance. Will assist the shift supervisor in the preparation and presentation of all meals served in the dining hall and other facilities. Will be responsible for breakfast, lunch, or dinner preparation, set up, replenishing during service and breakdown of the hot entrée line.

       

      REQUIREMENTS:

      • Minimum 2 years of culinary experience
      • Former military Culinary Specialists ideal 
      • Culinary skills such as sautéing, braising, roasting, poaching, baking, frying, etc.
      • Knowledge of the variety of foods and recipes offered on the four-week cycle menu
      • Knowledge of industry standards such as sanitation
      • Required to wear uniforms provided as well as safety shoes while on duty
      • Active Secret Clearance required
      • Must be US citizen
      • Valid driver's license

       

      EOE   M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      INSIDE MACHINISTS

      2 TEMP-HIRE POSITIONS, after 90 Days

      INDUSTRY: MACHINE SHOP

      LOCATION: CHARLESTON, SC

       

      SUMMARY:

      Seeking Inside Machinists who are experienced with portable machining, flange basing, line boring, etc.

       

      REQUIREMENTS:

      • Minimum 3 years of experience operating manual lathe and mill
      • Experience with in place machining
      • Experience with flange basing, line boring
      • Ability to read blueprints
      • Own tools
      • Must pass background check

      EOE   M/F



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      PLC PROGRAMMER / TROUBLESHOOTER

      A TEMP-HIRE POSITION

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      PAY RANGE: up to $30 per hour

      1st Shift

       

      REQUIREMENTS:

      • Must be very experienced with PLC programming and troubleshooting
      • Must have experience with Allen Bradley 5000 software and drives
      • Square D ProWorx NXT experience a plus

       

      EOE  M/F

       

       

       

       


      Must-have Qualifications:

         




          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          PLANT EQUIPMENT MAINTENANCE MECHANICS

          2 TEMP-HIRE POSITIONS with Excellent Benefits

          INDUSTRY: MANUFACTURING

          LOCATION: NEWPORT NEWS

          PAY RANGE: up to $30 per hour

          1st Shift 

           

          SUMMARY: 

          Seeking Plant Maintenance Technicians to work on line equipment and robotics. 


          REQUIREMENTS:

          • Minimum 5 years of experience in equipment maintenance: Electrical, PLC's, and Mechanical
          • Experience working on line equipment and robotics
          • Strong background in PLC's required
          • Must have own tools

           

          EOE  M/F

           

           

           

           


          Must-have Qualifications:

             




              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              INDUSTRIAL ELECTRICIAN: PLANT MAINTENANCE

              A CONTRACT POSITION for 6 Months

              INDUSTRY: MANUFACTURING

              LOCATION: HAMPTON

              PAY RATE: $20 - $24 per hour 


              SUMMARY:

              Seeking an Electrician who is experienced primarily with electrical and some mechanical troubleshooting and repair for plant maintenance.

               

              EOE  M/F

               

               

               

               


              Must-have Qualifications:

                 




                  To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                  Recruiter: Heidi Elam       
                  eMail a friend about this job

                  SR. CERTIFICATION & ACCREDITATION ANALYSTS

                  3 CONTRACT POSITIONS from Mid-April through July 31st

                  INDUSTRY: GOVERNMENT CONTRACTOR

                  LOCATION: FALLS CHURCH, VA

                   

                  SUMMARY:

                  Several short-term opportunities for Sr. C&A Analysts with Risk Management Framework (RMF) experience to support various Government contracts. Will provide IT service delivery for the Pentagon Force Protection Agency (PFPA) and be part of the Cyber Security team.

                  • Conduct DIACAP to RMF transition and/or initiate RMF for expiring/multiple support systems to meet RMF transition suspense.
                  • Conduct CAP process
                  • Coordinate execution of full system scans 
                  • Coordinate and validate Security Implementation Guides
                  • Coordinate and ensure remediation of High and Medium vulnerabilities
                  • Track hundreds of vulnerabilities
                  • Validate systems remain compliant with current patches and updates
                  • Create waivers that include purpose, justification, impact, system and operational risk 
                  • Update all required supporting documentation in eMASS

                    

                  REQUIREMENTS:

                  • Bachelor's degree in Computer Science or related technical discipline, or equivalent combination of education and professional experience
                  • 8-10 years of relate experience in data security administration
                  • Active Secret Clearance required

                   

                  EOE  M/F

                   

                   

                   

                   

                   

                   

                     

                     

                     

                     

                    EOE  M/F 



                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    SHIPYARD REPAIR WORKERS w. Active Confidential Clearance

                    30 CONTRACT POSITIONS

                    LOCATION: NORFOLK, VA

                     

                    CTR is currently recruiting for Ship Repair Workers with Active Confidential Clearance.

                    •   Red Badge Shipfitters                                            
                    •   Red Badge Sheetmetal Mechanics                                            
                    •   Red Badge Pipefitters                      
                    •   Red Badge Welders
                    •   Red Badge Outside Machinists
                    •   Red Badge Formica Workers                                             

                     Must hold a Confidential Clearance. Must be RapidGate eligible.

                    Recent US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

                     

                    EOE M/F 



                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    SHIPFITTERS with Clearance

                    5 CONTRACT POSITIONS AVAILABLE

                    INDUSTRY: NAVY SHIP REPAIR 

                    LOCATION: PORTSMOUTH, NH

                       

                      REQUIREMENTS: 

                      • Former Hull Technicians ideal 
                      • Must have active Secret Security Clearance
                      • Must be eligible for Rapidgate badge

                       

                      EOE   M/F

                       

                       

                       



                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                      Recruiter: Heidi Elam       
                      eMail a friend about this job

                      MARINE ELECTRICIANS with Clearance

                      5 CONTRACT POSITIONS AVAILABLE

                      INDUSTRY: NAVY SHIP REPAIR 

                      LOCATION: PORTSMOUTH, NH

                         

                        REQUIREMENTS: 

                        • Must have active Secret Security Clearance
                        • Must be eligible for Rapidgate badge

                         

                        EOE   M/F

                         

                         

                         



                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                        Recruiter: Heidi Elam       
                        eMail a friend about this job

                        INDUSTRIAL ELECTRO-MECHANICAL TECHNICIAN  (Industrial Technician)

                        A TEMP-HIRE POSITION (after 90 days)

                        INDUSTRY: FOOD MANUFACTURING

                        LOCATION: NEWPORT NEWS

                        SHIFTS:

                        7am-3pm  and 3pm-11pm

                         

                        JOB DESCRIPTION:

                        Selected candidate will play a key role in upgrading the existing equipment and overseeing new food processing equipment and lines that will be added to the facility this year. Compliance to all human safety and food safety policies and procedures is number one.

                         

                         REQUIREMENTS:

                        • Minimum 3 years of experience as documented Industrial Electrical / Service Technician 
                        • Industrial Electrician with electronic and mechanical experience in Food Manufacturing 
                        • Some formal schooling in Electrical / Instrumentation preferred
                        • Electrical, electronic, pneumatic & mechanical knowledge and skills
                        • AC/DC control circuits
                        • PLC troubleshooting
                        • Ladder logic knowledge and basic programming skills
                        • VFD's
                        • 120v, 240v, 480v single and 3-phase power circuits
                        • 24v and 120v control circuits
                        • Able to use hand tools, multi-meters (analog & digital), ammeters, amp probes, etc.
                        • Able to work fro prints, schematics
                        • Basic math skills
                        • Good communication and basic computer skills
                        • Knowledge of programmable logic controllers (PLC)
                        • Knowledge of Human Machine Interfaces
                        • Experience with proximity and photo sensors
                        • Able to comply with all OSHA and company safety and electrical regulations, incl. Lock Out / Tag Out, and Arc Flash protection

                         

                        EOE  M/F


                         

                           

                           

                           

                           



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          SHIPPING & RECEIVING: ELECTRONICS

                          A TEMP-HIRE POSITION, after 90 days

                          INDUSTRY: MANUFACTURING

                          LOCATION: NEWPORT NEWS, VA

                           

                          SUMMARY:

                          Receiving components, updating inventory, making sure they get to the right location in the warehouse.

                          --picking parts for production

                          -preparing shipping documents and preparing products for shipments

                           

                          REQUIREMENTS: 

                          -good product shipping and receiving experience in manufacturing or similar with components

                          -good computer skills

                          -self motivated/self sufficient, pay attention to detail

                           

                          EOE   M/F 

                           

                           



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          ELECTRONIC ASSEMBLER

                          A POSITION with Temp-Hire Potential

                          INDUSTRY: MANUFACTURING 

                          LOCATION: HAMPTON

                          Shift: 7am-4:30pm

                           

                          SUMMARY:

                          Under supervisor's direction, assemble, wire, and calibrate precision vacuum gauges. 

                           

                          REQUIREMENTS:

                                     GED/HS diploma

                                     6 months to one year electronics experience or equivalent experience and/or training 

                                     Soldering skills ideal, but not required

                                     Must be able to use small hand tools, ESD equipment and microscope 

                                     Able to use electronics test equipment incl. multi-meters, voltmeters, ohmmeters, current meters, etc. 

                            Read and Interpret Assembly Drawings

                                       Basic computer skills (open/close applications, enter data

                               

                               

                              EOE M/F

                               

                             



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            SHIP CHECK LEAD SUPERVISOR

                            A TEMP-HIRE POSITION (after 90 Days)

                            INDUSTRY: SHIP REPAIR

                            LOCATION: VIRGINIA BEACH

                             

                            SUMMARY:

                            Seeking former Navy personnel with a background of Hull Technician, Engineman, Machinist Mate, or Machinist Repairman. Former Navy Chief would be ideal for this leadership and experience role.

                             

                            REQUIREMENTS:

                            • Able to train personnel to maximize quality and production of ship check team
                            • Able to verify that jobs are screened properly
                            • Knowledge of Navy acronyms
                            • Familiarity with Navy Structural, Mechanical, and Electrical systems.
                            • Able to read blueprints, drawings, diagrams and technical manuals 
                            • 10% overseas travel
                            • Must obtain passport, CAC, and RapidGate pass
                            • Able to use databases and spreadsheets

                             

                             

                             

                             

                              



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            SR. TECHNICAL WRITER

                            A TEMP-HIRE POSITION

                            INDUSTRY: GOVERNMENT CONTRACTOR

                            LOCATION: HERNDON, VA

                             

                            SUMMARY:

                            Seeking a Technical Writer with strong experience in editing technical resumes. Experience with Federal Government and IT field, especially Software Engineering, Database Administration and Cyber Security highly desirable.

                            • Create Resource Package Templates and candidate response framework
                            • Format candidate resumes into Company format
                            • Review for content, grammar, spelling, formatting
                            • Communicate with candidates or subcontractors regarding resource packages
                            • Enter contingent candidates into the database
                            • Edit, review and format program newsletters

                              

                            REQUIREMENTS:

                            • Associate degree in related technical discipline or equivalent combination of education and professional experience
                            • 3-5 years of related experience preparing technical documentation
                            • Basic understanding of IT terminology
                            • MS Office Suite experience
                            • Strong editing and proofreading skills
                            • Excellent English and communication skills
                            • Customer service oriented
                            • Must be able / willing to obtain Government Security clearance

                            EOE

                             

                             

                               

                               

                               

                               

                              EOE  M/F 



                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Heidi Elam       
                              eMail a friend about this job

                               

                              Orthopedic Tech

                              Newport News, VA

                               

                              Description

                              Primary Location

                              Under supervision of the department physicians and advanced practice providers, assists the physician/provider with all routine and advanced orthopedic clinical procedures as described below. Provides written instructions for patients in the use of various orthopedic devices and sets up and maintains supplies and equipment; may provide direction to the  Junior Ortho Tech or Clinical Personnel.


                              Essential Functions:
                              • Upholds Healthcare Facility Policies and Procedures, Principles of Responsibilities and applicable state, federal and local laws
                              • Assists the physician with all routine and advanced orthopedic and orthopedic clinical procedures
                              • May instruct the work of  other Orthopedic Technicians and trainees in the application of casts, traction setups, treatment room procedures, and other procedures and techniques to patients of the age group served
                              • Performs all of the Essential Duties and Responsibilities of Orthopedic Technician.
                              • The following is a non-exhaustive list of functions in the Medical Office Setting:
                              • May apply casts, splints, traction or other orthopedic devices to the extent that this is a technical function that does not involve choosing the appropriate treatment, setting a fracture, manipulating bone or tissue or assessing that patient's clinical condition
                              • Remove casts, splints and orthopedic devices
                              • Prepare the patient for procedures
                              • Set up instruments and equipment for procedures
                              • Apply and remove bandages and dressings that does not involve debridement
                              • Provide written instructions to patients regarding proper cast care and use of crutches and devices
                              • Remove sutures or staples from superficial incisions after sutures/staples have been assessed for removal by a provider.
                              • Assist patients in ambulation and transfers
                              • Collect and record patient data including height, weight, temperature, pulse, respiration rate and blood pressure, and basic information about the presenting and previous condition(s)
                              • Record patient care services provided in the medical record
                              • Other technical or administrative tasks as required

                              Basic Qualifications:
                              Experience
                              • Two (2) years experience as an Orthopedic Technician within the last three (3) years.
                              Education
                              • Graduate of an accredited Orthopedic Technician program or equivalent training in the military or two (2) years of full time experience as an Orthopedic Technician.
                              • High School diploma or equivalent.
                              Licenses, Certifications, Registrations
                              • Basic Life Support (BLS)
                              • Certified by the National Board for Certification of Orthopedic Technologist (NBCOT).

                              Additional Requirements:
                              • Demonstrates knowledge and ability to utilize principles, practices, and techniques of basic human anatomy, types of fractures, orthopedic equipment, and use of cast &splints.
                              • Ability to demonstrate and apply knowledge of cast application and traction and orthopedic appliance application.
                              • Ability to demonstrate and utilize knowledge of clinical orthopedic and sterile techniques.
                              • Under direct supervision, the ability to work and assist in the Treatment Room.
                              • Customer service skills.

                              Preferred Qualifications:
                              • Minor Procedure background preferred.



                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Melody Fortune       
                              eMail a friend about this job
                              Dermatology Practice located in Newport News is searching for an experienced medical assistant to join their team.  Full-time hours. Competitive hourly wage. Dermatology experience is desired, but will consider a background in General Surgery or Plastic Surgery/Family Medicine.   Need excellent EMR skills so you can provide scribing for the Physician during procedures. FAST- PACED!   Will work in Newport News and Williamsburg.

                              Send resume for immediate consideration to Recruiter.



                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Melody Fortune       
                              eMail a friend about this job

                              HR RECRUITER: Shipyard Trades

                              A DIRECT-HIRE POSITION

                              INDUSTRY: STAFFING & RECRUITING

                              LOCATION: MOBILE, AL

                              SALARY: Open

                               

                              SUMMARY: 

                              A very fast paced temporary staffing firm specializing in skilled trades and skilled positions seeks to add a human resources recruiter to our staff.

                              Responsibilities:

                              - Sourcing candidates from various databases and contacting candidates that meet job requirements.

                              - Performing telephone screening of candidates.

                              -Communicating to the candidates job parameters and specifics.

                              -will involve extensive telephone time and moderate computer sourcing time.

                              Keywords:  recruiter, recruiting, human resources, navy, USN, USMC, Army

                              Job Requirements

                              Must have exceptional communication skills and a high energy level.

                              Must be very results driven and self motivated.

                              Must be able to work in a fast paced, high volume recruiting environment.

                              Must be very comfortable being on the telephone for 7 hours a day.

                              Must have good computer skills

                              Some college education in a related field a plus

                              previous recruiting experience in a Shipyard Trades Staffing environment desired

                               

                              EOE  M/F


                              Must-have Qualifications:

                              .




                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Heidi Elam       
                              eMail a friend about this job

                              ELECTRICAL ASSEMBLER

                              A contract position for an indefinite time frame

                              Location: Newport News

                              Shift: 8am-5pm, Mon-Fri

                              Pay Rate: up to $16 per hour or higher

                               

                              JOB DESCRIPTION / REQUIREMENTS:

                               

                              Seeking two cabinet shop technicians responsible for building electronic control cabinets.

                              Assemble industrial enclosed panels to engineering drawings and wire accordingly. Basic knowledge of hand tools and wiring. One year experience in Manufacturing/Production.

                              Former Avionics Electronics Technicians or Avionics Electricians ideal.

                              Electrical Assembly:

                              • Read schematics and wiring diagrams
                              • Wire up cabinets,
                              • perform wiring tests
                              • measure, cut, strip, crimp and route 8 wires to the right terminals
                              • neatness is important
                              • interpret color codes

                              EOE M/F 



                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Heidi Elam       
                              eMail a friend about this job

                              Nurses needed for Drug and Alcohol Inpatient Treatment Center in Williamsburg. Background in Mental Health a plus.   8 hour shifts.   Duties would be administering medication, Admissions , assuring patients are compliant with treatment schedules.   This position is full-time and PRN!!!!  This position is 7-days per week.    $18.00 per hour.  New Grads Welcome.

                              7A-3P 

                              3P to 11P  *** is needed now.

                              11P to 7A 

                              Contact Recruiter for immediate interview.



                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                              Recruiter: Melody Fortune       
                              eMail a friend about this job

                              SHIPPING & RECEIVING CLERK: ELECTRONICS 

                              A TEMP-HIRE POSITION

                              INDUSTRY: MANUFACTURING

                              LOCATION: HAMPTON 

                               

                              SUMMARY: 

                              Seeking a Shipping & Receiving Clerk who will be performing administrative and physical tasks associated with storing, shipping, receiving, and distributing materials, parts, supplies, and equipment.

                              • Checks received goods from purchase orders/invoices
                              • Maintains records of all received & shipped goods and discard defective items
                              • Posts shipping charges & weights and prepare them for shipping
                              • Arranges kitting packages for production
                              • Inspects, distributes, and stocks items in inventory and manufacturing lines

                               

                              REQUIREMENTS:

                              • High school diploma or GED
                              • Prior experience with electronic parts
                              • 4-5 years experience with stockrooms, inventory management, and physical inventory
                              • Ability to lift up to 15lbs
                              • Must be good at following oral and written directions
                              • Clean background
                              • Pass drug screening

                              EOE

                               


                              Must-have Qualifications:

                                 




                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Heidi Elam       
                                eMail a friend about this job

                                Outpatient Coder   - Camp Pendleton, CA

                                Seeking experienced credentialed Coder to work on-site.  CPC, CPC-H, CCS, CCS-P, RHIT, or RHIA certification is required. Prior DOD coding experience is desired, but not required. Must be able to work independently and effectively. Excellent  communication skills, attention to detail, and strong computer skills required.  Must be able to satisfy the requirements for a government security clearance.

                                U.S. Citizenship required.

                                Compensation: Competitive Salary and excellent benefits to include comprehensive medical, dental, prescription services, 401(k) Plan match, paid leave and more.  EOE/M/F/D/V

                                Application Details:Send resume, salary requirements and proof of credential to Recruiter



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Melody Fortune       
                                eMail a friend about this job

                                IPS Coder  

                                Seeking experienced credentialed Coder to work on-site.  CPC, CPC-H, CCS, CCS-P, RHIT, or RHIA certification is required. Prior DOD coding experience is desired, but not required. Must be able to work independently and effectively. Excellent  communication skills, attention to detail, and strong computer skills required.  Must be able to satisfy the requirements for a government security clearance.

                                U.S. Citizenship required.

                                Compensation: Competitive Salary and excellent benefits to include comprehensive medical, dental, prescription services, 401(k) Plan match, paid leave and more.  EOE/M/F/D/V

                                Application Details:Send resume, salary requirements and proof of credential to Recruiter



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Melody Fortune       
                                eMail a friend about this job

                                Inpatient Coder  

                                Seeking experienced credentialed Coder to work on-site.  CPC, CPC-H, CCS, CCS-P, RHIT, or RHIA certification is required. Prior DOD coding experience is desired, but not required. Must be able to work independently and effectively. Excellent  communication skills, attention to detail, and strong computer skills required.  Must be able to satisfy the requirements for a government security clearance.

                                U.S. Citizenship required.

                                Compensation: Competitive Salary and excellent benefits to include comprehensive medical, dental, prescription services, 401(k) Plan match, paid leave and more.  EOE/M/F/D/V

                                Application Details:Send resume, salary requirements and proof of credential to Recruiter



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Melody Fortune       
                                eMail a friend about this job

                                Outpatient Coder/Auditor/Trainer needed at Camp Pendleton, CA for Government Contract.

                                Successful Government Contractor, a nationwide consulting firm specializing in healthcare information management services is currently seeking personnel for this exciting government project on a full-time basis.

                                Responsibilities: Apply coding classification standards and guidelines to medical record documentation; ensure that all encounter documentation is evaluated for consistency with the nature of the patient encounter (i.e., audit); evaluate occurrences of deficiencies and/or inconsistencies in medical record documentation through the healthcare provider query process, and assist health care providers in proper code selection. The Auditor/Trainer shall specifically be responsible for performing the duties and tasks associated with auditing Government coded outpatient records and providing training each month.

                                Requirements:
                                Coder certification may be any of the following based on their required duties: CPC-H, CPC, CCS, CCS-P, RHIT, RHIA

                                Minimum 1 year of auditing experience within the preceding 2 years.
                                Possess 1 year of HIM experience in process improvement, data quality improvement, or documentation improvement.

                                Coder is required to have extensive knowledge of the official ICD-9/10-CM, CPT, MS-DRG, APC, and HCPCS Coding Guidelines for coding and reporting. Contract personnel shall read, understand, speak and write English.

                                Coding position will require some provider training and minimal travel. Based on previously completed audits, the coder/trainer will follow up on issues or trends found within the documentation of a particular physician for evaluation and further training.

                                U.S. Citizenship required.

                                Compensation: Competitive salary,  and excellent benefits!

                                Please Contact Recruiter for immediate consideration. EOE/M/F/D/V



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Melody Fortune       
                                eMail a friend about this job

                                Surgical Center is in need of a part-time/PRN Radiographic Technician.  This is a DAY position.  Main need is every Thursday from 6:30a until noon.  Occasional Friday.   Must have C-Arm experience.

                                ARRT and VA License, 

                                Contact Recruiter for immediate consideration.



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Melody Fortune       
                                eMail a friend about this job

                                FIRE PROTECTION SPRINKLER FITTER FOREMEN

                                3 TEMP-HIRE POSITIONS (after 90 Days)

                                INDUSTRY: INDUSTRIAL CONSTRUCTION

                                LOCATION: RICHMOND, VA

                                PAY RATE: $19 per Hour

                                 

                                SUMMARY:

                                Responsible for daily activities of assigned personnel on the assembly, installation, testing, and repair of pipes, fittings, and fixtures for fire protection sprinkler systems.

                                 

                                REQUIREMENTS:

                                • High school diploma or equivalent
                                • Minimum 5 years of experience in Fire Sprinkler Installation
                                • Minimum 2 years or experience as Foreman
                                • NICET I certification preferred
                                • Able to lift up to 50lbs
                                • Must have satisfactory driving record
                                • Able to pass background check
                                • Able to pass drug screening

                                 

                                EOE  M/F 



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Heidi Elam       
                                eMail a friend about this job

                                PLUMBER JOURNEYMAN

                                6 TEMP-HIRE POSITIONS, after 90 Days

                                INDUSTRY: COMMERCIAL CONSTRUCTION

                                LOCATION: RICHMOND, VA

                                PAY RATE: $23 per hour

                                 

                                 

                                REQUIREMENTS: 

                                   

                                  • 5 years of Commercial Plumbing experience in Field Plumbing operations
                                  • Must have active Virginia State Plumbing Journeyman card
                                  • Able to read and interpret blueprints
                                  • Extensive knowledge of all plumbing systems installation, which will be tested during hiring process
                                  • Ability to fabricate offsets
                                  • Clean Background and ability to pass drug test

                                   

                                  EOE  M/F

                                   

                                   

                                     

                                     

                                     

                                     



                                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                    Recruiter: Heidi Elam       
                                    eMail a friend about this job

                                    SHEET METAL GENERAL LABORERS: MECHANICAL CONSTRUCTION

                                    2 CONTRACT POSITIONS

                                    INDUSTRY: COMMERCIAL CONSTRUCTION

                                    LOCATION: RICHMOND, VA

                                    PAY RATE: $11 per hour

                                      

                                    SUMMARY: 

                                    Will assist mechanics with fabrication, assembly, installation, and repairs of sheet metal products, equipment and ductwork.

                                     

                                    REQUIREMENTS: 

                                    • High school diploma / GED preferred
                                    • Knowledge of trade related hand tools
                                    • Experience in Construction / Industrial environment preferred
                                    • Must have satisfactory driving record
                                    • Must be able to work overtime
                                    • Lift 50lbs
                                    • Prior military experience preferred
                                    • Able to pass background check
                                    • Able to pass drug test

                                     

                                    EOE  M/F

                                     

                                     

                                       

                                       

                                       

                                       



                                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                      Recruiter: Heidi Elam       
                                      eMail a friend about this job

                                      SHEET METAL HELPERS: NEW CONSTRUCTION

                                      5  CONTRACT POSITIONS

                                      INDUSTRY: COMMERCIAL CONSTRUCTION

                                      LOCATION: RICHMOND, VA

                                      PAY RATE: $17 per hour

                                        

                                      SUMMARY: 

                                      Extensive knowledge in the assembly, installation, and repair of sheet metal ducts, flex, dampers, and equipment of heading, cooling, and exhaust air systems according to SMACNA or mechanical codes.

                                       

                                      REQUIREMENTS: 

                                      • High school diploma / GED preferred
                                      • 4+ years of sheet metal mechanic experience in construction / industrial environment
                                      • Familiar with ductmate, spiral, slide, and drive ductwork
                                      • Must have satisfactory driving record
                                      • Must be able to work overtime
                                      • Lift 50lbs
                                      • Prior military experience preferred
                                      • Able to pass background check
                                      • Able to pass drug test

                                       

                                      EOE  M/F

                                       

                                       

                                         

                                         

                                         

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        MULTI-CRAFT CARPENTER

                                        A CONTRACT POSITION

                                        INDUSTRY: COMMERCIAL CONSTRUCTION

                                        LOCATION: RICHMOND, VA

                                        PAY RATE: $19 - $26 per hour

                                          

                                         

                                        REQUIREMENTS: 

                                        • Multi-craft background: Carpentry, Plumbing, Cement, Drywall, etc.
                                        • Lift more than 75lbs
                                        • Must have driver's license and transportation
                                        • Clean background for more than 7 years
                                        • Able to pass drug test

                                         

                                        EOE  M/F

                                         

                                         

                                           

                                           

                                           

                                           



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          CTR is currently recruiting for all types of Ship Repair Workers to include:

                                          • Boatswains Mates
                                          • Welders or Hull Technicians
                                          • Shipfitters
                                          • Pump Mechanics and Valve Mechanics
                                          • Outside Machinists or Machinist Mates
                                          • Gas Turbine Mechanics
                                          • Insulators/Laggers
                                          • Marine Electricians
                                          • Painters
                                          • Engineman
                                          • Machinery Technicians
                                          • Riggers and Boatswains mates
                                          • Stage Builders
                                          • Pipefitters

                                          US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

                                           

                                          EOE M/F 


                                          Must-have Qualifications:

                                          • Having held a security clearance would be a definite plus
                                          • Clean background
                                          • Ability to pass a drug screening



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          SKILLED TRADE WORKERS w. Active Secret Clearance

                                          CONTRACT POSITIONS

                                          INDUSTRY: SHIPYARD

                                          LOCATION: NORFOLK, VA

                                           

                                          • Cleared Pipefitters                     
                                          • Cleared Shipfitters                     
                                          • Cleared Structural Welders       
                                          • Cleared Outside Machinists       
                                          • Deck Tile Mechanic

                                            EOE  M/F



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          CONVENTIONAL MACHINISTS

                                          2 TEMP-HIRE POSITIONS, after 90 Days

                                          INDUSTRY: MACHINE SHOP

                                          LOCATION: PORTSMOUTH, VIRGINIA


                                           

                                          REQUIREMENTS:

                                          • Minimum 3 years of experience operating manual lathe and mill
                                          • Experience working with large parts
                                          • Ability to read blueprints
                                          • Own tools
                                          • Must pass background check

                                           

                                          EOE   M/F



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          WELDER / FITTERS

                                          2 TEMP-HIRE POSITIONS

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: TOANO (Greater Williamsburg Area)

                                          PAY RATE: $13 per Hour for Entry Level up to $24 for TIG Aluminum Welder

                                           

                                          REQUIREMENTS: 

                                          • Apprentice School graduate for Entry Level position (Shipyard Welding Apprentices welcome)
                                          • Experienced Welders must be able to read blueprints and TIG weld aluminum
                                          • Experience in a Shop or Manufacturing setting 

                                           

                                          EOE  M/F 



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          MIG / TIG WELDER / FITTER

                                          A TEMP-HIRE POSITION 

                                          INDUSTRY: MACHINE SHOP

                                          LOCATION: CHESAPEAKE 

                                          PAY RANGE: $18-20 per hour 

                                           

                                          SUMMARY: 

                                          Seeking a TIG & MIG Welder who is highly skilled in aluminum and stainless tig, mig, and fluxcore welding techniques. The workplace setting will be a machine shop and will be producing parts according to government specifications. Must be able to work from blueprints.

                                          Will be asked to pass a Tig and Mig test on aluminum.

                                           

                                        • EOE M/F



                                        • To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          SYSTEMS ADMINISTRATOR  

                                          A DIRECT-HIRE POSITION

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS, VA

                                          PAY RANGE: $60K or higher. Relocation available for the right candidate

                                           

                                          SUMMARY:

                                           Responsible for setup, maintenance, and support of HP-UX and IBM Informix related database systems and other business systems. Responsible for product lifecycle management.

                                          • Troubleshoot and resolve system issues with respect to line of business systems
                                          • Respond to helpdesk tickets
                                          • Coordinate problem resolution with Company IT services and/or system vendors
                                          • Manage and administer Unix / Linux systems, especially installations, configurations, file systems, access rights, logins and updates
                                          • Create and manage shell scripts
                                          • Oversee system backups
                                          • Set up, configure and maintain web servers, especially Apache and/or Tomcat. 
                                          • Administer Informix / Oracle databases
                                          • Create and manage SQL scripts
                                          • Create work instructions and procedures for systems administration
                                          • Create training materials and perform end user training 

                                           

                                          REQUIREMENTS:

                                          • B.S. or Master's degree in Computer Science or related technical discipline
                                          • Extensive work-related experience in Unix/Linux systems
                                          • Experience with database administration
                                          • Experience with CAD or PLM software

                                           

                                          EOE  M/F

                                           

                                           

                                           

                                           

                                           

                                           

                                           



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          X-RAY OPERATOR: INDUSTRIAL

                                          A TEMP-HIRE POSITION (after 90 days) 

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: TOANO (Greater Williamsburg Area) 

                                          PAY RATE: $11.50 per hour 

                                          2ndShift: 2pm-10pm, Monday-Sunday, Extensive Overtime

                                           

                                          SUMMARY: 

                                          Seeking an X-ray Operator who has experience working within an industrial environment.

                                           

                                          REQUIREMENTS: 

                                          • High school diploma or trade certification
                                          • Strong mechanical aptitude
                                          • High attention to detail
                                          • Willingness to work overtime
                                          • Computer skills
                                          • Reliable transportation
                                          • Pass aptitude test
                                          • Clean background
                                          • Pass drug screening 

                                           

                                          EOE  M/F 


                                          Must-have Qualifications:





                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          BOOKKEEPER

                                          A TEMP-HIRE POSITION after 90 Days

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS


                                          SUMMARY: 

                                          Seeking a Bookkeeper in Newport News, VA to perform data entry and file accounts payable and accounts receivable, and entering data into QuickBooks.

                                           

                                          EOE  M/F 


                                          Must-have Qualifications:

                                          • Minimum 2 years bookkeeping experience
                                          • Experience with QuickBooks, Excel, Word, Outlook
                                          • Excellent Math skills needed (basic addition, subtraction, division, multiplication)
                                          • Must be comfortable in a Manufacturing environment
                                          • Ability to pass background check
                                          • Ability to pass drug screening



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          SOFTWARE DEVELOPER

                                          A DIRECT-HIRE POSITION with Excellent Benefits

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS, VA

                                           

                                          SUMMARY:

                                          Will assist in developing and writing software for components and systems designed for heavy underground equipment. 

                                           

                                          REQUIREMENTS:

                                          • B.S. degree in Electrical Engineering Technology, or Computer Engineering or equivalent and 2 years of experience in an engineering environment
                                          • or 5 years of work-related experience in Engineering environment or equivalent combination of education and experience
                                          • Knowledge of software programming tools, e.g. CoDeSys, C++.
                                          • Knowledge of communication protocols such as RS232, CanOpen, J1939
                                          • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
                                          • Experience applying fractions, percentages, ratios, and proportions to practical situations
                                          • Able to travel within the US and abroad 20% of the time

                                           

                                            EOE  M/F 



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          PROCESS TECHNICIAN

                                          2 CONTRACT POSITIONS

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: WILLIAMSBURG

                                          PAY RANGE: $10-11 per Hour for entry-level, up to $14 for experienced

                                           

                                          SUMMARY:

                                          Assist production departments and maintain the facility in a state of readiness by performing the following tasks: 

                                          • Set up and operate machine tools such as Shape Cut Tables, CNC mills, Lap and Polish machines, Ultra Sonic Washers.
                                          • Make minor adjustments in machine tooling and programs
                                          • Monitor production yields and trouble shoot problems in production process
                                          • Perform Facilities preventive Maintenance as scheduled
                                          • Assist in making machine repairs

                                           

                                          REQUIREMENTS:

                                          • High school diploma or GED
                                          • Prior experience as a Process Technician in manufacturing
                                          • Ability to read and comprehend simple instructions, write simple correspondence, present information in one on one and in small group situations to customers, clients, and other employees of the organization

                                            

                                           EOE M/F 

                                           



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          METAL MECHANIC / MIG WELDER, Entry-Level

                                          A CONTRACT  POSITION, Temp-Hire Possible

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: VIRGINIA BEACH

                                          PAY RATE: $13 - $15 per hour

                                           

                                          Seeking Metal Mechanics who are well versed in Welding, able to read basic blueprints and do some assembly and fitting.

                                           

                                          REQUIREMENTS:

                                          • 2 years of education in welding with emphasis on MIG welding and blueprint reading. TIG a plus.
                                          • Clean background required

                                           

                                          EEO M/F 

                                           

                                           

                                           

                                           

                                           

                                           

                                           



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          WELDER, MIG / TIG

                                          A TEMP-HIRE POSITION (after 90 days)

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: YORKTOWN, VA

                                           

                                           Seeking a Shop Welder to perform Short Arc/Hard Wire welding. 

                                           

                                          REQUIREMENTS:

                                          • High School graduate or equivalent education certification
                                          • 3-5 years of experience with welding and blueprint reading in a manufacturing or shop environment
                                          • Must be able to read engineering drawings
                                          • Able to read a tape measure
                                          • Forklift experience would be nice but not required
                                          • Must be able to pass criminal background check

                                          EOE  M/F



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          FORKLIFT / REACH TRUCK OPERATORS

                                          4 TEMP-HIRE POSITIONS, Must be available to work any shift 

                                          First Shift: 7am-3pm 

                                          Second Shift: 3pm-11pm

                                          Third Shift:    11pm - 7:30am

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS (DENBIGH)

                                          PAY RATE: $12.50 per hour (Can be increased to $13.50 or $14 when hired permanently after 90 days)


                                          REQUIREMENTS:
                                          --Must have Forklift and Crown Lift (Reach Truck) experience
                                          --Must be willing to work overtime

                                          --Must have stable work history 

                                          --Must be willing to work any shift 

                                          --Warehouse experience required
                                          --Must be willing to work overtime
                                          --Willing to work in a freezer environment: Freezer gear will be provided.
                                          --Must have reasonably clean background

                                           

                                          EOE M/F 



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          MARINE ELECTRICIANS, 1st Class

                                          4 CONTRACT POSITIONS

                                          LOCATION: NORFOLK 

                                           

                                          Brief Job Description:

                                          Install, test and troubleshoot electrical equipment on Navy ships, following drawings and schematics. Will be working 10-hour days 6 days per week.

                                           

                                          Requirements:

                                          •  Must have experience installing, testing, and troubleshooting electrical systems on Navy ships
                                          • All candidates must pass a backgound check.
                                          • Knowledge of NAVSEA Standard Items
                                          • Former Navy Electrician Mates ideal.
                                          • Must be rapidgate eligible

                                          EOE  M/F 



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                           

                                          QA INSPECTORS

                                          5 CONTRACT POSITIONS with Temp-Hire Potential

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS

                                          PAY RATE: $10 per Hour

                                          First Shift Positions:            7am-3pm

                                          Second Shift Positions:       3pm-11pm

                                          Third Shift Positions:           11pm-7am

                                           

                                           

                                           RESPONSIBILITIES:

                                          • Inspect incoming materials to verify they meet customer specs
                                          • Daily process audits
                                          • Calibration
                                          • Issue quality alerts and administer quality holds
                                          • Receive and review quality holds
                                          • Enter data into computer

                                          REQUIREMENTS:

                                          • Prior Inspection or Quality Assurance experience in Manufacturing / Production

                                           EOE  M/F

                                           



                                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                          Recruiter: Heidi Elam       
                                          eMail a friend about this job

                                          VISUAL INSPECTOR

                                          A TEMP-HIRE POSITION (after 90 days)

                                          INDUSTRY: MANUFACTURING

                                          LOCATION: NEWPORT NEWS

                                          PAY RATE: $10 per hour

                                          Mon-Fri, 6am-2pm

                                           

                                          SUMMARY: 

                                          Seeking a Visual QA Inspector who will be working with automotive parts. Will use a probe to test plating adhesion.

                                           

                                          REQUIREMENTS:

                                          • Prior Visual Inspection experience in a Manufacturing setting
                                          • Able to work in a fast-paced environment
                                          • Must be able to pass a visual inspection test using a microscope
                                          • Clean background
                                          • Pass drug screening 

                                           

                                          EOE M/F 


                                          Must-have Qualifications:

                                             

                                             




                                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                            Recruiter: Heidi Elam       
                                            eMail a friend about this job

                                            PIPEFITTERS, 1st Class

                                            3 CONTRACT POSITIONS

                                            INDUSTRY: SHIPYARD

                                            LOCATION: NORFOLK, VA

                                               

                                            REQUIREMENTS: 

                                            • Minimum 5 years' ship repair pipe fitting experience
                                            • Grade III SB experience preferred
                                            • Able to braze, tack weld, burn
                                            • Ability to read prints
                                            • Full pipefitter tool bag
                                            • Ability to pass criminal background check
                                            • Must be rapidgate eligible
                                            • Ability to pass drug screening

                                             

                                            EOE M/F


                                            Must-have Qualifications:

                                               




                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              CNC MACHINISTS

                                              2 TEMP-HIRE POSITIONS (after 90 days)

                                              One  2nd Shift and One 3rd Shift Position

                                              LOCATIONS: VIRGINIA BEACH, CHESAPEAKE, NORFOLK, HAMPTON

                                              PAY RATE: up to $25 per hour

                                               

                                              SUMMARY:

                                              Set up and operate computer numerical controlled (CNC) machines and machining centers to fabricate metallic parts according to specifications and blueprints.

                                               REQUIREMENTS:

                                              • Set up and operate CNC lathes and mills
                                              • Read blueprints
                                              • Edit G and M codes
                                              • Prior machine shop experience a must
                                              • Own tools
                                              • Must be able to pass criminal background check

                                               

                                              EOE M/F

                                               



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              PIPE WELDERS 

                                              5  CONTRACT POSITIONS

                                              ACTIVE SECRET SECURITY CLEARANCE REQUIRED

                                              INDUSTRY: SHIPBUILDING

                                              LOCATION: PORTSMOUTH, VA


                                              EOE   M/F

                                               

                                               

                                               

                                               

                                               

                                               

                                               

                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              MANUFACTURING ENGINEERS

                                              2 DIRECT-HIRE POSITIONS with Excellent Benefits

                                              INDUSTRY: MANUFACTURING

                                              LOCATION:  NEWPORT NEWS, VA

                                              SALARY: Upper $60's K

                                               

                                              SUMMARY:

                                              • Test and troubleshoot for engineering roles
                                              • Train production associates in the proper operation of the production machines and equipment
                                              • Troubleshoot machines to resolve mechanical and electrical malfunctions
                                              • Gather records and information from a variety of departments, must be able to communicate across departments
                                              • Lead others in manufacturing and improve manufacturing practices of the associates to reduce errors, improve manufacturing time, and improve safety
                                              • Work with outside suppliers for development, purchase, and installation

                                               

                                               REQUIREMENTS:
                                              • Bachelor's degree in Mechanical Engineering or Electrical Engineering
                                              • Strong analytical skills including GD&T, SPC PLC, AutoCad, Inventor or other CAD experience
                                              • Minimum 2 years manufacturing engineering experience

                                               

                                              EOE M/F

                                               

                                               

                                               

                                               

                                               

                                                



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              MAINTENANCE TECHNICIANS: INDUSTRIAL AUTOMATION

                                              5 DIRECT-HIRE POSITIONS with Excellent Benefits

                                              INDUSTRY: MANUFACTURING

                                              LOCATION: NEWPORT NEWS

                                              PAY RATE: $20.40 per hour to start 



                                              SUMMARY: 

                                              Seeking Maintenance Technicians to install, repair, and maintain automated production equipment and machinery. Must have experience with automation and PLC Programming. Must be available for night shift (night shift is strongly preferred) and must work every other weekend.

                                               

                                              EOE M/F 



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              SHIP REPAIR WORKERS NEEDED

                                              15 CONTRACT POSITIONS

                                              NEWPORT NEWS, VA


                                              Seeking the following skilled trade workers with Active Security Clearance: 

                                                4  1st Class Machinists   

                                                2  1st Class Electricians 

                                                2  1st Class Fitters

                                                2  1st Class Welders

                                                2  1st Class Pipefitters 

                                               

                                              Shift: 7am - 3:30pm

                                               

                                              EOE  M/F 

                                               

                                               

                                               

                                               



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              MULTI-CRAFT TECHNICIANS / MILLWRIGHTS

                                              2 TEMP-HIRE POSITIONS with Excellent Benefits after Hired

                                              INDUSTRY: RECYCLING PLANT

                                              LOCATION: CHESAPEAKE

                                              PAY RATE: $18 - 20 per Hour

                                               2nd and 3rd Shift

                                               

                                               

                                              EOE   M/F

                                               

                                               

                                               

                                               

                                               

                                                



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              PRODUCTION SUPERVISOR

                                              A DIRECT-HIRE POSITION with Excellent Benefits

                                              INDUSTRY: MANUFACTURING

                                              LOCATION:  NEWPORT NEWS, VA

                                              SALARY: $60K

                                               

                                              SUMMARY:

                                              Responsible for managing the associates on the production and monitoring the work flow. 
                                              Create and evaluate production quotas for manufacturing associates
                                              Record manufacturing associate attendance and submit time to payroll
                                              Monitor and evaluate manufacturing associate performance and counsel
                                              Ensure that manufacturing associates adhere to plant safety policies and procedures
                                              Identify safety hazards and correct issues
                                              Maintain inventory of production supplies and administer supplies
                                              Manage training processes

                                               

                                              REQUIREMENTS:

                                              • Associates Degree or equivalent manufacturing experience
                                              • Must have Sheet Metal Fabrication and Job Shop experience in fast paced environment
                                              • Previous supervisory experience in a manufacturing environment
                                              • Effective communication skills
                                              • Computer knowledge including spreadsheets and word processing
                                              • Experience with these operations is helpful: CNC Turret Punch Press, CNC Laser, CNC Press Brake, Welding, CNC Machining, Powder Coating, Assembly 

                                               

                                              EOE M/F

                                               

                                               

                                               

                                               

                                               

                                                



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              CNC LASER SET UP OPERATORS

                                              2 TEMP-HIRE POSITIONS

                                              INDUSTRY: MANUFACTURING

                                              LOCATION: NEWPORT NEWS

                                              1st Shift Position: 7am-3:30pm and

                                              2nd Shift Position: 3:30pm - 12am.          

                                              PAY RANGE: $12-22 per hour ($20 - $22 only for exceptional candidates)

                                               

                                              REQUIREMENTS:

                                              • Able to produce sheet metal parts by setting up and operating computer numerical (CNC) Laser.
                                              • Must able to set up and operate CNC Laser to cut light gauge sheet metal.
                                              • Minimum 3-5 years of experience required
                                              • Understand machine set up including program retrieval, proper gases, proper nozzles, lenses cleaning and adjustments, etc.
                                              • Understand startup and shut down for laser machines
                                              • Must be able to understand metal fabrication concepts and processes
                                              • Ability to edit G code
                                              • Able to use precision tools
                                              • Check accuracy of work using blueprint and measuring tool
                                              • Work from blueprints, rough sketches, and customer samples
                                              • Locate and move raw material with pallet jack or forklift
                                              • Separate cut parts from scrap
                                              • Work well with Engineering
                                              • Follow safety rules and maintain a clean working environment

                                               

                                              EOE M/F

                                               




                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              CNC PRESS BRAKE OPERATORS

                                              2 TEMP-HIRE POSITIONS (after 90 days)

                                              INDUSTRY: MANUFACTURING

                                              LOCATION: NEWPORT NEWS

                                              1st Shift Position: 7am-3:30pm and

                                              2nd Shift Position: 3:30pm - 12am.           Overtime Available

                                              PAY RANGE: $12-22 per hour 

                                               

                                              REQUIREMENTS:

                                              • Must able to set up, program and operate manual and CNC press brakes
                                              • Must have knowledge of brake tooling and changing tooling.
                                              • Proficient in the use of precision measuring tools
                                              • Able to work from blueprints, rough sketches, and customer samples
                                              • Comfortable working in a fast-paced environment
                                              • Work well with Engineering

                                               

                                              EOE M/F 




                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              MAINTENANCE MECHANIC: BUILDING & PRODUCTION EQUIPMENT

                                              A TEMP-HIRE POSITION (after 90 days)

                                              INDUSTRY: MANUFACTURING

                                              LOCATION: NEWPORT NEWS

                                              PAY RANGE: $13 - $19 per Hour

                                               

                                              JOB DESCRIPTION:

                                              Responsible for general maintenance of the facility. Maintain and repair a variety of plant production equipment, incl. CNC Turret Punch Presses, CNC Lasers, CNC Panel Benders, Belt Sanders, Grinders, Welding Machines, Ovens, Powder Coating equipment, and machinery involving mechanical, electrical, pneumatic, and hydraulic functions.

                                                

                                              REQUIREMENTS:

                                              • Industrial building and equipment maintenance experience required.
                                              • Must have electrical, mechanical, structural, and some hydraulic experience
                                              • Experience with sheetmetal fabrication machines preferred but not required
                                              • Clean background required

                                               

                                               EOE M/F



                                              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                              Recruiter: Heidi Elam       
                                              eMail a friend about this job

                                              MIG WELDERS: LIGHT GAUGE SHEETMETAL 

                                              4 Temp-to-Hire Positions

                                              Location: Newport News, VA 

                                              Pay Range: $10.00 - $16.00 per hour

                                              Day Shift: 7am - 3:30pm  

                                              Night Shift: 3:30pm - 12:00am  

                                               

                                              SUMMARY: 

                                              Seeking MIG Welders for light gauge sheetmetal production with job shop experience. Will Fit and Weld sheet metal parts to the specifications of each job, and ensure they meet the outlined requirements.  Specifications are gathered from work orders, customer drawings, sample parts, and/or completed assemblies.
                                               
                                              • Welding components in flat, vertical, or overhead positions
                                              • Examining work pieces for defects and measure work pieces with calipers, straightedges, templates, etc.,  to ensure conformance with specifications
                                              • Welding separately or in combination, using steel, aluminum, stainless steel, and other alloys;
                                              • Clamping, holding, tack-welding, heat-bending, grinding or bolting component parts to obtain required configurations and positions for welding;
                                              • Determining appropriate welding technique;
                                              • Keeps equipment operating by following operating instructions, troubleshooting breakdowns, performing preventive maintenance;
                                              • Produce the maximum number of parts in minimum time by working efficiently.

                                               

                                              REQUIREMENTS: 

                                              • Minimum 3-5 years of MIG Welding experience
                                              • Experience welding steel, aluminum, stainless steel, and other alloys
                                              • Welding in flat, vertical, and overhead positions
                                                • Read basic blueprints with knowledge of welding symbols.
                                                • Communicate effectively with supervisors, coworkers, and vendors as needed;
                                                • Able to lift up to 100 lbs
                                                • Able to work in cold or hot temperatures in plant.

                                               

                                              EOE M/F 

                                               

                                               


                                              Must-have Qualifications:

                                                 




                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                WELDER / MILLWRIGHT

                                                A CONTRACT POSITION

                                                INDUSTRY: POWER PLANT

                                                LOCATION: CHESAPEAKE, VA

                                                PAY RATE: $20 - $22 per hour

                                                40-60 hours per week 

                                                 

                                                 

                                                 

                                                EOE  M/F 

                                                 

                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                PRODUCTION SUPERVISOR

                                                A DIRECT-HIRE POSITION with Excellent Benefits

                                                INDUSTRY: MANUFACTURING

                                                LOCATION:  NEWPORT NEWS, VA

                                                SALARY: $56,500 - $70K

                                                 

                                                SUMMARY:

                                                Responsible for managing the associates on the production and monitoring the work flow. 
                                                Create and evaluate production quotas for manufacturing associates
                                                Record manufacturing associate attendance and submit time to payroll
                                                Monitor and evaluate manufacturing associate performance and counsel
                                                Ensure that manufacturing associates adhere to plant safety policies and procedures
                                                Identify safety hazards and correct issues
                                                Maintain inventory of production supplies and administer supplies
                                                Manage training processes

                                                 

                                                REQUIREMENTS:

                                                • Associates Degree or equivalent manufacturing experience
                                                • Previous supervisory experience in a manufacturing environment
                                                • Effective communication skills
                                                • Computer knowledge including spreadsheets and word processing

                                                 

                                                 

                                                EOE M/F

                                                 

                                                 

                                                 

                                                 

                                                 

                                                  



                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                CNC MACHINIST

                                                A TEMP-HIRE POSITION (after 30 days)

                                                INDUSTRY: MACHINE SHOP

                                                LOCATION: CHESAPEAKE

                                                PAY RANGE: $18-21 per hour

                                                 

                                                REQUIREMENTS:

                                                • Minimum 5 years of Job Shop machining experience
                                                • Strong experience with CNC Mills
                                                • Ability to edit programs
                                                • Experience operating 5-axis Boring Machine
                                                • Conventional machining experience also required
                                                • Must be able to machine from blueprints
                                                • Must have own tools

                                                 

                                                EOE M/F

                                                 



                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                MIG / TIG WELDER: FINISH WELDER

                                                A TEMP-HIRE POSITION after 90 Days

                                                INDUSTRY: MILLWORK & WELD SHOP

                                                LOCATION: TOANO (Greater Williamsburg Area)

                                                 

                                                SUMMARY:

                                                • Laying out pieces to be assembled according to blueprints, schematics or work orders. Use manual/semi-automatic/automatic welding equipment to join, surface, fabricate, and repair parts of metal or other weldable material

                                                 REQUIREMENTS:

                                                • Must be able to read blueprints and weld parts utilizing various fixtures.

                                                  Minimum 5 years of experience in MIG and TIG welding both mild steel and 304 stainless steel in 14, 16, 18 and 20 gauge tubing.

                                                  Must know how to use a band saw, milling machine, 7” angle grinder, die grinder, clamps and fixture tools.

                                                 

                                                EOE  M/F 



                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                NEEDED ASAP

                                                Accountant needed for large Medical Practice with 4-locations.

                                                JOB TITLE:  Accountant

                                                LOCATION:  Hampton Office

                                                SUMMARY:
                                                Manage accounts payable, preparation of bank deposits, credit card billings, expense reports and reconcile vendor statements. Must be able to handle multi-company tasks, work independently and be extremely reliable.

                                                DUTIES AND RESPONSIBLILITIES:

                                                Payables:

                                                ·  Open and sort accounting mail, match invoices with any back-up (i.e. packing slips, receipts)

                                                ·  Review and enter invoices into Accounting system and code with correct GL Account

                                                ·  Prepare all invoices for  approval before payment

                                                ·  Prepare Open Payables report in preparation for weekly vendor payments

                                                ·  Prepare and process accounts payable checks and Insurance/Patient Reimbursement checks

                                                ·  Set up, maintain and review all vendor accounts to ensure information and payments are up to date

                                                ·  Correspond with vendors and respond to inquiries

                                                 

                                                Cash:

                                                ·   Prepare Daily Cash Report

                                                ·   Prepare Bank reconciliations for review

                                                ·   Prepare bank deposits and deliver to the bank daily

                                                Administrative:

                                                ·  Maintain all accounting files

                                                ·  Assist in month end, quarterly and annual closing

                                                ·  Assist HR in preparing and cutting Doctor/Employee Expense Reimbursement Checks

                                                ·  Work with outside Accountant in preparing monthly journal entries and general ledger reconciliations

                                                Payroll:

                                                ·  Process Payroll for 100+ employees

                                                ·  Reconcile payroll deductions with vendor invoices

                                                ·  Record Tax information for payroll deductions and exemptions

                                                REQUIREMENTS:

                                                ·  High School Diploma; At least three years clerical/accounting related field or any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved.

                                                ·  Proficient in MS Office (Word, Excel)

                                                ·  Proficient in Quickbooks

                                                PHYSICAL/MENTAL DEMANDS:

                                                Requires prolonged sitting, standing and light (under 20 lbs) lifting associated with a normal office environment.  Requires the use of office equipment, such as telephones, computers, copiers and fax machines.

                                                Send resume to Recruiter for immediate consideration



                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Melody Fortune       
                                                eMail a friend about this job

                                                CRANE OPERATOR: NCCCO Certified

                                                A DIRECT-HIRE POSITION with Excellent Benefits 

                                                INDUSTRY: DREDGING, SHIPYARD  & BRIDGE CONSTRUCTION 

                                                LOCATION: NORFOLK, VA


                                                 

                                                REQUIREMENTS:

                                                • Must be NCCCO certified
                                                • American Crane experience strongly preferred
                                                • Clam Shell Bucket experience preferred 

                                                 

                                                EOE  M/F 


                                                Must-have Qualifications:





                                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                                Recruiter: Heidi Elam       
                                                eMail a friend about this job

                                                notices...

                                                Now you can join our. . .
                                                Talent Network
                                                • Sign up for job alert emails
                                                • Search by location
                                                • Apply online
                                                • Submit your resume