One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

LANDSCAPERS 

SEVERAL TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: HOSPITALITY / RESORT 

LOCATION: WILLIAMSBURG

 

REQUIREMENTS:

  • Responsible for mowing grasses and edging
  • Cleaning areas around the pool and patios
  • Pull weeds as necessary
  • Mulching, trimming shrubs and trees
  • Miscellaneous other tasks
  • Valid driver's license
  • Good driving record

 EOE  M/F

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

POWDER COATER

A DIRECT-HIRE or TEMP-HIRE POSITION

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

1st Shift Position: 7am-3:30pm and

 Overtime Available

PAY RANGE: $12-16 per hour 

 

REQUIREMENTS:

  • Previous powder coating experience required
  • Comfortable working in a fast-paced environment
  • Able to work in fast paced Assembly, packaging, loading and unloading powder coating conveyor
  • Able to inspect parts for quality
  • Assembly experience, using hand tools
  • Strong math skills required
  • Strong mechanical skills and a high level of productivity are a must
  • Must be able to take direction

 

EOE M/F 




To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CULINARY STAFF, COOK I and COOK II, with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days) 

LOCATION: WILLIAMSBURG

PAY RANGE: $16.50 - $17.80 per Hour, which includes Health Insurance Benefits

1st Shift: 5:45am - 2:15pm Mon - Fri

2nd Shift: 11am - 7:30pm Mon - Fri

Sat, Sun: 7:30am - 7pm

 

SUMMARY:

Seeking Culinary Personnel, Cooks I and Cooks II, who possess an active Secret Security Clearance. Will assist the shift supervisor in the preparation and presentation of all meals served in the dining hall and other facilities. Will be responsible for breakfast, lunch, or dinner preparation, set up, replenishing during service and breakdown of the hot entrée line.

 

REQUIREMENTS:

  • Minimum 2 years of culinary experience
  • Former military Culinary Specialists ideal 
  • Culinary skills such as sautéing, braising, roasting, poaching, baking, frying, etc.
  • Knowledge of the variety of foods and recipes offered on the four-week cycle menu
  • Knowledge of industry standards such as sanitation
  • Required to wear uniforms provided as well as safety shoes while on duty
  • Active Secret Clearance required
  • Must be US citizen
  • Valid driver's license

 

EOE   M/F 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINISTS: PRODUCTION

2 DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

Must be able to work nights and weekends:  7pm-7am. Will train on day shift and then transition to nights.

 

SUMMARY:

Responsible for day-to-day operation and troubleshooting of metal machining equipment and processes used to produce precision components for assembly into various products manufactured in the plant.

 

 REQUIREMENTS:

  • High school diploma or GED required
  • Minimum 2 years of work experience in operation and troubleshooting of metal turning and fabrication equipment
  • Experience with automatic screw machines is desirable
  • Able to utilize basic shop floor math and basic writing skills
  • Proficient in basic Metric to English unit conversions
  • Working knowledge of SPC (Statistical Process Control) desirable
  • Must be able to read and work from blueprints, engineering drawings using geometric dimensioning and tolerancing

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

AUTOMOTIVE TECHNICIANS with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days)

LOCATION: WILLIAMSBURG, VA

PAY RATE: $26.20 per Hour, which includes Health Insurance Benefits 

Day Shift, 40 hours per week, with minimal overtime

 

 SUMMARY:

Serve as Automotive Technician on passenger carrying vehicles, trucks, and trailers of all sizes. service, repair, and overhaul various types of vehicles.

 

REQUIREMENTS:

  • High School diploma or equivalent with minimum 3 years of related experience
  • Must have experience working on passenger vehicles
  • Read and understand technical manuals
  • Operate forklift trucks, roll back wreckers, flatbed trucks, and other various types of equipment
  • Able to lift up to 50lbs
  • Active Secret Clearance required

 

 

EOE  M/F

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

HOUSEKEEPERS, with Active Secret Clearance

4 TEMP-HIRE POSITIONS (after 90 Days) 

LOCATION: WILLIAMSBURG

PAY RANGE: $16.10 per Hour, which includes health insurance benefits

Shift: 6am-2:30pm Mon-Fri 

 

SUMMARY:

A great position because the hours are so steady. An opportunity for former military people going to school or with second jobs. No experience is required, just a willingness to make beds and work as a team.

     

     REQUIREMENTS:

    • Active Secret Clearance required
    • Must be US citizen
    • Valid driver's license

     

    EOE   M/F 

     

     

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    SHIPYARD REPAIR WORKERS w. Active Confidential Clearance

    25 CONTRACT POSITIONS

    LOCATION: NORFOLK, VA

     

    CTR is currently recruiting for Ship Repair Workers with Active Confidential Clearance.

    •   Red Badge Shipfitters                                            
    •   Red Badge Sheetmetal Mechanics                                            
    •   Red Badge Pipefitters                      
    •   Red Badge Outside Machinists
    •   Red Badge Formica Workers                                             

     Must hold a Confidential Clearance. Must be RapidGate eligible.

    Recent US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

     

    EOE M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    RESTORATION TECHNICIANS

    2TEMP-HIRE POSITIONS

    INDUSTRY: WATER & FIRE DAMAGE RESTORATION  

    LOCATION: WILLIAMSBURG

    PAYA RATE: $9-12 per hour depending on experience and certifications 

     

     

    REQUIREMENTS:

    • Must be able to perform general labor every day, sometimes in extreme conditions such as sewage, mold, fire, floods, etc.
    • Restoration Industry experience preferred
    • IICRC Certification preferred 

     

    EOE M/F 

     

      



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    SKILLED TRADE WORKERS w. Active Secret Clearance

    CONTRACT POSITIONS

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK, VA

     

    • Cleared Pipefitters                     
    • Cleared Shipfitters                     
    • Cleared Structural Welders       
    • Cleared Outside Machinists       
    • Deck Tile Mechanic

      EOE  M/F



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    CONVENTIONAL MACHINIST

    TEMP-HIRE after 90 Days

    INDUSTRY: AEROSPACE

    LOCATION: NEWPORT NEWS


     

    SUMMARY:

    Set up and operate a variety of machine tools such as Lathes, Milling, Shapers, Planers, Precision Grinders to make parts, mechanisms, machines, to exacting tolerances. Interpret Blueprints, Sketches, Engineering Specifications.

     

    REQUIREMENTS:

    • Minimum 2 years of experience operating manual lathe and mill 
    • Minor CNC Machining experience
    • Ability to read blueprints
    • Own tools required

    EOE     M/F

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    X-RAY OPERATOR: INDUSTRIAL

    A TEMP-HIRE POSITION (after 90 days) 

    INDUSTRY: MANUFACTURING

    LOCATION: TOANO (Greater Williamsburg Area) 

    PAY RATE: $11.50 per hour 

    3rd Shift: 10pm-6am, Monday-Sunday, Extensive Overtime

     

    SUMMARY: 

    Seeking an X-ray Operator who has experience working within an industrial environment.

     

    REQUIREMENTS: 

    • High school diploma or trade certification
    • Strong mechanical aptitude
    • High attention to detail
    • Willingness to work overtime
    • Computer skills
    • Reliable transportation
    • Pass aptitude test
    • Clean background
    • Pass drug screening 

     

    EOE  M/F 


    Must-have Qualifications:





    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MANUAL INSIDE MACHINIST

    TEMP-HIRE after 90 Days

    INDUSTRY: MANUFACTURING

    LOCATION: CHESAPEAKE


     

    SUMMARY:

    Create parts and make repairs according to instructions and/or drawings. Operate all machine shop equipment. Operate overhead cranes and perform rigging. Perform incoming and outgoing inspections. Fill out all paperwork as necessary.

     

    REQUIREMENTS:

    • Minimum 5 years of experience operating milling machines, lathes, boring mills, and grinders
    • Able to work with extremely close tolerances (i.e. .0005" - .001")
    • Ability to read blueprints
    • Own tools required
    • Must be willing to work overtime
    • Pass background check

    EOE     M/F

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MAINTENANCE TECHNICIANS: Resort Community

    CONTRACT POSITIONS with Temp-Hire Potential

    INDUSTRY: HOSPITALITY 

    LOCATION: WILLIAMSBURG

    PAY RATE: $13.44 per Hour 

    Shift: 6:30am - 3:30pm or 4pm in the summertime

               7am - 3:30pm or 4pm the rest of the year 

    Must be willing / able to work every weekend (Will have 2 day off during the week)

     

    SUMMARY 

    Assist Maintenance Team with maintaining vacation resort community. Change out dishwashers, toilets. Perform light caulking, painting, light drywall work. Report any maintenance problems, or safety hazards.

       

       REQUIREMENTS 

      • Prior Apartment Maintenance experience ideal
      • Experience changing out dishwashers, toilets
      • Experience with caulking, painting, and light drywall work
      • Must be willing / able to work every weekend
      • Good Customer Service skills
      • Good driving record
      • Valid driver's license

       

      EOE   M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SHIP REPAIR WORKERS    w. Active Secret Clearance

      32 CONTRACT POSITIONS

      LOCATION: PORTSMOUTH, NEW HAMPSHIRE

       

      CTR is currently recruiting for Ship Repair Workers with Active Secret Clearance. Starts October 1

      • 2   Red Badge Marine Electricians
      • 5   Red Badge Painters or former Boatswains Mates
      • 10 Red Badge Temp Pipefitters
      • 10 Red Badge Outside Machinists
      • 5   Red Badge Riggers

      Former US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

       

      EOE M/F 



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CONVENTIONAL MACHINISTS

      2 TEMP-HIRE POSITIONS, after 90 Days

      INDUSTRY: MACHINE SHOP

      LOCATION: PORTSMOUTH, VIRGINIA


       

      REQUIREMENTS:

      • Minimum 3 years of experience operating manual lathe and mill
      • Experience working with large parts
      • Ability to read blueprints
      • Own tools
      • Must pass background check

       

      EOE   M/F



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      MAINTENANCE TECHNICIAN: AUTOMATION

      A DIRECT-HIRE POSITION with Excellent Benefits

      INDUSTRY: MANUFACTURING

      LOCATION: VIRGINIA BEACH, VA



      SUMMARY: 

      Ensure proper functioning of mechanical equipment through regular maintenance and troubleshooting of hydraulic and pneumatic assemblies such as valves, pumps, cylinders, ball bearings, etc.. Ensure proper functioning of robots.

       

      REQUIREMENTS:

      • Minimum 3 years work-related experience on automated production equipment
      • Journeyman License a plus
      • Ability to read blueprints and schematics to determine method or assembly of parts or machine
      • Ability to perform tool changes
      • Ability to read metric and use measuring tools
      • Must have strong hands-on problem solving skills
      • Able to train operators and work well in a team

       

       EOE M/F 



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CNC LASER OPERATOR

      A TEMP-HIRE POSITION

      INDUSTRY: MACHINE SHOP

      LOCATION: CHESAPEAKE

       

      SUMMARY:

      Will be operating a CNC Laser Cutter. 

      REQUIREMENTS:

      1-3 years of experience operating a CNC laser machine and  working with different metals.

       

      EOE  M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CNC LASER OPERATOR

      A TEMP-HIRE POSITION

      INDUSTRY: MACHINE SHOP

      LOCATION: CHESAPEAKE

       

      SUMMARY:

      Will be operating a CNC Laser Cutter. 

      REQUIREMENTS:

      1-3 years of experience operating a CNC laser machine and  working with different metals.

       

      EOE  M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      HAUL TRUCK OPERATOR

      A CONTRACT POSITION from January - July, 2018

      INDUSTRY: CONSTRUCTION

      LOCATION: EMPORIA

      PAY RATE: $20-$29 per hour

      Flexible schedule: sometimes 40 hours/ week, sometimes no hours, depending on availability of the truck. 

       

      BRIEF DESCRIPTION:

      Seeking Haul Truck Operator who will operate and test drive 240t haul truck. Fill and operate 65t water truck on the site to control dust during testing. During rainy conditions or during times of hauling inactivity, will assist the testing group with organizing and cleaning of the grounds site.

       

      REQUIREMENTS:

      • High school diploma or equivalent, technical school or relevant apprenticeship and 3 years as Heavy Industrial Equipment Operator experience
      • Ability to safely operate and drive heavy haul truck to transport tons of materials for short distances in a surface environment
      • Must have and maintain valid driver license and safe driving record
      • Must have reliable transportation
      • Must be able to pass drug screen

       

      EOE M/F

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SHIPYARD SKILLED TRADES

      300 CONTRACT POSITIONS

      INDUSTRY: SHIPYARD

      LOCATION: NEWPORT NEWS, VA

      Pipefitter Helpers            Local Only                        20
      Valve Techs                                                               4
      Machinists - CNC                                                       2
      Machine Operator                                                      1
      Welder Helpers Grinder - Linesman  Local On        15
      Structural Welder                                                      37
      Shipfitters                                                                139        
      Sheetmetal Fillet Welder                                             6
      Pipe Fitters                                                                98
      Blasters                                                                     12
      C7 Blasters                                                                 1 

      .

      EOE M/F 

       


      Must-have Qualifications:



      US Citizenship required.

      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      AUTOMATED MANUFACTURING TECHNICIANS

      4  TEMP-HIRE POSITIONS

      INDUSTRY: MANUFACTURING

      LOCATION: TOANO (Greater Williamsburg Area)

      PAY RANGES: 

      1st Shift: 61m-2pm, rotating shift, must be avail. Monday-Sunday      $11.50/hour

      3rd Shift: 10pm-6am, rotating shift, must be avail. Monday-Sunday       $11.75/hour

      Able to work overtime 

       

      SUMMARY:

       
      Seeking Manufacturing Technicians in Toano that are able to work well with small materials and have good attention to detail. 

       

      REQUIREMENTS: 

      • Prior experience working in a manufacturing setting
      • Ability to lift 75lbs repeatedly
      • Reliable transportation
      • Must take a mechanical aptitude test
      • Pass criminal background check
      • Pass drug screening 

       

      EOE M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      FOOD SERVICE WORKERS, with Active Secret Clearance

      4 TEMP-HIRE POSITIONS (after 90 Days) 

      INDUSTRY: GOVERNMENT SITE

      LOCATION: WILLIAMSBURG

      PAY RATE: $14.25 per Hour, which includes Health Insurance Benefits

      Rotating Shift: Will be scheduled for early shift one week and late shift the next:

      --6am-2:30pm

      --11am-7:30pm 

       

      SUMMARY:

      We are in need of several front of the house staff. They need to be flexible, run food, serve the guests, operate a register, do dishes, make coffee, etc. They do not need to be able to do this entire list but, be flexible most of all.

        

      REQUIREMENTS:

      • Active Secret Clearance required
      • Must be US citizen
      • Valid driver's license

       

      EOE   M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      UTILITY WORKERS, with Active Secret Clearance

      4 TEMP-HIRE POSITIONS (after 90 Days) 

      INDUSTRY: GOVERNMENT SITE

      LOCATION: WILLIAMSBURG

      PAY RATE: $14.52 per Hour 

        

      SUMMARY:

      The utility staff will assist the culinary staff in kitchen and dining area to maintain a clean, orderly facility to meet mandated health requirements. Will assist the Chef, supervisor and other culinary staff in the daily requirements within the food service operations. Will operate commercial automatic dishwashing equipment. Assist with stocking orders received from food purveyors. Assist in kitchen cleanliness, sanitation, and safety.

        

      REQUIREMENTS:

      • Some restaurant or food service experience preferred
      • Ability to lift up to 50lbs 
      • Active Secret Clearance required
      • Must be US citizen
      • Valid driver's license
      • Willing and able to receive top-secret clearance

       

      EOE   M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      PRODUCTION PLANNER: STRUCTURAL STEEL MANUFACTURING

      A DIRECT-HIRE POSITIONS with Excellent Benefits

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      PAY RANGE: $55K - $75K

      Generous Relocation Assistance is Available. 

       

      SUMMARY

      Plan, prepare, and issue production schedules for Structural Steel, Heavy Steel manufacturing processes through fabrication, incl. welding. Create master schedule for sequence of each operation to meet shipping dates according to customer orders. Schedule workflow for each department and manufacturing operation. Plan fabrication, paint and assembly sequence to ensure timely completion of production orders. Utilize Logistics and Warehouse software and ERP system and train end users. Utilize nesting software. Read and interpret engineering drawings. Ascertain availability of parts and correct shortages. Assist with managing inventory for fabrication and assembly. Initiate Engineering Change Requests and update Bills of Material. Participate in continuous improvement projects.

       

      REQUIREMENTS:

      • B.S. degree and 4 years of related work experience
      • Must have strong Heavy Steel Fabrication experience. Manufacturing Engineer/Planner background
      • Will also consider a Manufacturing Engineer with supply chain concentration, heavy steel/welding, and SAP background
      • Ability to read blueprints
      • Knowledge of weld symbols and bevels.
      • Nesting software required
      • AutoCAD experience or similar
      • Knowledge of inventory software and order processing systems
      • Knowledge of Project Management software, MS Word and Excel spreadsheets
      • Math skills: percentages, circumference, and volume. Knowledge of basic algebra and geometry.
      • Strong oral and written communication skills
      • Knowledge of manufacturing processes such as planning, bill of material, shop floor monitoring, and costing.
      • Experience Enterprise Resource Planning (ERP), Engineering Data Management (EDM), and Warehouse Management System (WMS) a plus
      • AIPICS CPIM certification preferred but not required
      • Up to 10% overnight travel, domestic and international
      • Must be able to obtain valid driver's license and passport
      • Clean background
      • Ability to pass drug test

       

      EOE  M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CLEANING TECHNICIANS

      2 TEMP-HIRE POSITIONS

      INDUSTRY: WATER & FIRE DAMAGE RESTORATION  

      LOCATION: WILLIAMSBURG


       

      SUMMARY:

      Will pack and clean homes after disasters, restoring water and fire damage.

       

      REQUIREMENTS:

      • Must be able to perform general labor every day, sometimes in extreme conditions such as sewage, mold, fire, floods, etc.
      • Restoration Industry experience preferred

       

       

      EOE M/F 

       

        



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SEWING MACHINE OPERATORS

      2 TEMP-HIRE POSITIONS (after 90 days)

      INDUSTRY: MANUFACTURING 

      LOCATION: NEWPORT NEWS 

      PAY RANGE: $ 11 - 12 per Hour 

       

      REQUIREMENTS:

      Must have experience operating a commercial sewing machine.

       

      EOE  M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      COMPOSITE TECHNICIANS

      3 CONTRACT POSITIONS

      INDUSTRY: AEROSPACE

      LOCATION: NEWPORT NEWS

       

      SUMMARY: 

      Under direct guidance of higher grade employees to perform duties involving construction and installation of model parts.  Oral and/or written instructions from Technician B or above. 

      • Assist in set ups and layouts.

      • Assist in laminating and trimming operations.

      • Prepare materials for construction.

      • Related duties as assigned.

      • Use all hand tools.

      • Painting and decaling per instructions.

      • Daily/special housekeeping duties.

      • Implement all safety policy and hazardous waste communications.

       

       REQUIREMENTS: 

      • High school graduate or equivalent

      • Must have some experience working as a Composite Technician

      • Good physical condition (ability to lift 50 lbs.)

      • good math skills

      • Experience using basic hand tools 

       

      EOE M/F



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      PIPE WELDERS

      8 CONTRACT POSITIONS

      INDUSTRY: SHIP REPAIR

      LOCATION: NORFOLK  

       

      SUMMARY: 

      Seeking pipe welders with experience in shipyard pipe welding.

       

      REQUIREMENTS: 

      • Ability to read blueprints
      • Ability to pass criminal background check
      • Ability to pass drug screening

      EOE  M/F


      Must-have Qualifications:

         


          US Citizenship required.

          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          SHEETMETAL MECHANIC with Active Secret Clearance

          A CONTRACT POSITION

          INDUSTRY: SHIP REPAIR

          LOCATION: NORFOLK, VA 

          PAY RATE: $26 per hour  

           

          SUMMARY: 

          Seeking sheetmetal mechanics in Hampton Roads with experience in installation of foundations, bulkheads, furniture, and other associated sheetmetal work. Seeking local candidate only.

        • REQUIREMENTS:

        • Minimum 4 years as a First Class Sheetmetal Mechanic
        • Must have own tools
        • Ability to comprehend blueprints, diagrams, and sketches
        • Ability to pass criminal background check
        • Ability to pass a hair follicle drug screening
        • Will be OSHA 10 trained
        •  

          EOE M/F 


          Must-have Qualifications:



          US Citizenship required.

          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          CNC MACHINISTS

          2 TEMP-HIRE POSITIONS (after 90 days)

          INDUSTRY: AEROSPACE MANUFACTURER 

          LOCATION: NEWPORT NEWS

           

           REQUIREMENTS:

          • 10+ years of machining experience
          • Experience with complex set-ups using 3-5 axis CNC mills, lathes and vertical turning lathes
          • Able to calculate and set up controls for regulation of speeds and feeds
          • Must be able to read blueprints and use applied math
          • Able to operate conventional machines as needed
          • Available to work flexible schedule and overtime as needed
          • Must be able to pass criminal background check

          Preferred:

          • High tolerance prototype component experience
          • Ability to run multiple machines simultaneously 

           

          EOE M/F

           



          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          SHIPBOARD CLEANERS

          35 CONTRACT POSITIONS for 1-2 years

          INDUSTRY: SHIPYARD

          LOCATION: NEWPORT NEWS

          PAY RANGE: $17- $27.30 per Hour 

           

          REQUIREMENTS:  

          • Must have previous experience in ship cleaning
          • Ability to pick up scrap iron/steel weighing 40 to 50 pounds
          • Ability to enter voids /tanks to clean up debris.
          • Must have no health restrictions.
          • Experience working in a physically demanding environment and area.
          • General sweeping and scrap clean-up ability.

           

           EOE M/F 

           


          Must-have Qualifications:



          US Citizenship required.

          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          HOUSEKEEPING AIDES / PUBLIC SPACE ATTENDANTS

          3 TEMP-HIRE POSITIONS (after 90 Days) 

          INDUSTRY: HOSPITALITY 

          LOCATION: WILLIAMSBURG 

          PAY RATE: $10.40 per Hour

          Work Hours: 7am or 8am - close

          Must work every Friday, Saturday, and Sunday (will get 2 days off during the week) 

           

          SUMMARY 

          Assist Housekeeping Team with maintaining cleanliness, attractiveness, and safety of guest rooms and public areas in vacation resort community. Drive golf cart from one side to another. Report any maintenance problems, or safety hazards. Deliver excellent customer service to vacationing guests. Will operate the golf cart to deliver items to the guest villas. Will be responsible for cleaning all public areas, incl. fitness center, hallways, conference rooms, lounges, and restrooms. This includes vacuuming, dusting, cleaning windows, etc.

           

          REQUIREMENTS 

          • Prior Housekeeping experience 
          • Excellent Customer Service skills
          • Good driving record
          • Must be able / willing to work every weekend
          • Valid driver license

           

          EOE   M/F 

           

           

           

           

           

           



          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          MECHANICAL TECHNICIANS: TIG / MIG / Flux Welding

          2 CONTRACT POSITIONS for 6 Months

          INDUSTRY: MANUFACTURING

          LOCATION: NEWPORT NEWS

          PAY RATE: $23 - $30.50 per Hour (An additional $10 per hour will be available for non-local candidates)

           

          SUMMARY:

          Perform welding processes on aluminum and steel parts and assemble to required tolerances using welding metals and metal alloys. Determine layout and weld parts according to drawings and specifications. 

             

            REQUIREMENTS:

             

            • 5 years of Welding (TIG, MIG, Flux)
            • Welding Certification preferred

             

            EOE   M/F

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MAINTENANCE TECHNICIANS: INDUSTRIAL AUTOMATION

            2 DIRECT-HIRE POSITIONS with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS

            PAY RATE: $20.40 per hour to start 



            SUMMARY: 

            Seeking Maintenance Technicians to install, repair, and maintain automated production equipment and machinery. Must have experience with automation and PLC Programming. Must be available for night shift (night shift is strongly preferred) and must work every other weekend.

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PRODUCTION SUPERVISORS: Sheet Metal Shop

            2 DIRECT HIRE POSITIONS

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS

            1st Shift Position: 7am-3:30pm         Overtime Available

            PAY RANGE: $40K - $60K

             

            SUMMARY:

            Will be responsible for managing all production personnel with the goal of efficient, accurate production in a short lead time.  

             

            REQUIREMENTS:

            • Sheet Metal and Job Shop Experience required
            • Experience supervising production in a fast-paced environment is preferred
            • Ability to manage production employees' activities, and assisting production employees, with the goal of efficient, accurate production in a short lead time
            • Able to evaluate plant resources, organize, plan, direct and manage production staff
            • Excellent communication skills
            • Experience / knowledge in the following would be helpful: CNC Turret Punch Press, CNC Laser, CNC Press Brake, Welding, CNC Machining, Powder Coating, Assembly
            • Ability to use E-2 by Shoptech software, Microsoft Excel, and e-mail.
            • Clean background required

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            HVAC LEAD INSTALLER

            A TEMP-HIRE POSITION, after 90 Days

            INDUSTRY: RESIDENTIAL HEATING & AIR CONDITIONING

            LOCATION: SMITHFIELD

            Work Schedule: Mondays - Fridays, occasionally Saturdays

             

             
             SUMMARY:

            Residential Heating and Air Conditioning / HVAC company has an immediate need for an HVAC Lead Installer experienced with installing and change outs. Certification required. Seeking an experienced, good installer who will train the crew in residential installations. Will be serving customers throughout Hampton Roads. After being hired permanently, may be asked on occasion to drive company vehicle.

               

            REQUIREMENTS:

            • Must have Lead HVAC Installer experience 
            • Must be able to train the crew in residential installation
            • AC certification required
            • Knowledge of proper residential change out
            • Knowledge of split systems
            • Must have driver's license and reasonably clean driving record

             

             EOE  M/F

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            HVAC SERVICE TECHNICIANS: INDUSTRIAL & COMMERCIAL 

            SEVERAL TEMP-HIRE POSITIONS

            INDUSTRY: INDUSTRIAL & COMMERCIAL CONSTRUCTION

            LOCATION: CHESAPEAKE, VA

             

            PAY RANGE: Up to $32 per Hour

            Some Relocation Assistance is Available for Non-Local Candidates 

             

            Lots of Overtime Available 

             

            SUMMARY:

            Service Technician will be responsible for operating, repairing, and maintaining equipment including: HVAC equipment, building control system, systems involving electric and pneumatic air flow, water flow, gas/electric heating and cooling equipment, boilers, valves, apparatus and lines used in the distribution of heated, chilled or processed water, building automation system, variable frequency drive units, and computerized Maintenance Management Systems.

             

            REQUIREMENTS: 

            • High School diploma / GED
            • Minimum 10 years of HVAC service experience
            • HVAC Journeyman / Master certification preferred.
            • Knowledge of basic electricity & electrical and control systems
            • Ability to read and work from blueprints, specifications, and schematics
            • Military experience a plus
            • Must have a satisfactory driving record
            • Able to pass background check
            • Pass drug screening

             

            EOE M/F 

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            HVAC LEAD SERVICE TECHNICIAN

            A TEMP-HIRE POSITION, after 90 Days

            INDUSTRY: RESIDENTIAL HEATING & AIR CONDITIONING

            LOCATION: SMITHFIELD

            PAY RANGE: $20-25 or higher per Hour 

            Work Schedule: Mondays - Fridays, occasionally Saturdays

             

             
             SUMMARY:

            Residential Heating and Air Conditioning / HVAC company has an immediate need for an HVAC Lead Service Technician experienced with installing and change outs. Certification required. Seeking an experienced, good service technician who will train the crew in residential maintenance and repair. Will be serving customers throughout Hampton Roads. After being hired permanently, may be asked on occasion to drive company vehicle.

               

            REQUIREMENTS:

            • Must have Lead HVAC Service Technician experience 
            • 5-10 years of experience required
            • Must be able to train the crew in residential maintenance and repair
            • AC certification required
            • Knowledge of residential gas, oil, and heat pumps
            • Knowledge of proper residential change out
            • Knowledge of split systems
            • Must have driver's license and reasonably clean driving record

             

             EOE  M/F

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CNC MACHINISTS

            2 TEMP-HIRE POSITIONS (after 90 days)

            INDUSTRY:  MANUFACTURING 

            LOCATION: NEWPORT NEWS

            PAY RANGE: $23-30 per Hour 

             

             REQUIREMENTS:

            • Minimum 5 years of CNC experience
            • Ability to both write and edit programs
            • Must have experience and working knowledge of CAM software
            • Able to read and understand blueprints/drawings

            Preferred:

            • Experience with horizontal and vertical mills
            • Experience with MasterCAM software and FANUC controls

             

            EOE M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            WELDER / FITTER

            A TEMP-HIRE POSITION

            INDUSTRY: WELD SHOP 

            LOCATION: CHESAPEAKE

            First Shift, but must be flexible to work second shift also 

             

            BRIEF SUMMARY:

            A Combination Welder Level 1 position available to candidates able to use welding processes to join, fabricate and repair metal parts to close tolerances using layout techniques and blueprints.

             

            REQUIREMENTS: 

            • Must be able to read blueprints and MIG weld
            • 3+ years of experience in a Shop or Manufacturing setting 
            • Knowledge of welding symbols

             

            EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PIPEFITTERS

            2 CONTRACT POSITIONS

            INDUSTRY: SHIP REPAIR

            LOCATION: NORFOLK, VA

               

            REQUIREMENTS: 

            • Minimum 3-5 years' ship repair pipe fitting experience
            • Able to silver braze
            • Ability to read prints
            • Ability to pass drug screening

             

            EOE M/F


            Must-have Qualifications:

               




              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              MARINE ELECTRICIANS

              4 CONTRACT POSITIONS

              INDUSTRY: SHIPYARD

              LOCATION: NORFOLK, VA 


               

              REQUIREMENTS: 

              • Minimum 4 years of maritime experience
              • Must qualify for base access
              • Ability to pass drug screening 
              • Able to work mandatory overtime
              • Able to start on 1st shift, but transition to 2nd shift eventually

               

              EOE M/F 

               

               


              Must-have Qualifications:



              US Citizenship required.

              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              CNC LASER SET UP OPERATORS

              2 TEMP-HIRE POSITIONS

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS

              1st Shift Position: 7am-3:30pm and

              2nd Shift Position: 3:30pm - 12am.          

              PAY RANGE: $10-12 per hour for Trainee, $14-18 per hour for Experienced Operators, or higher for 5+ years' experience 

               

               REQUIREMENTS:

              • Able to produce sheet metal parts by setting up and operating computer numerical (CNC) Laser.
              • Must able to set up and operate CNC Laser to cut light gauge sheet metal.
              • Minimum 3-5 years of experience required
              • Understand machine set up including program retrieval, proper gases, proper nozzles, lenses cleaning and adjustments, etc.
              • Understand startup and shut down for laser machines
              • Must be able to understand metal fabrication concepts and processes
              • Ability to edit G code
              • Able to use precision tools
              • Check accuracy of work using blueprint and measuring tool
              • Work from blueprints, rough sketches, and customer samples
              • Locate and move raw material with pallet jack or forklift
              • Separate cut parts from scrap
              • Work well with Engineering
              • Follow safety rules and maintain a clean working environment

               

              EOE M/F

               




              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              Seeking 10 experienced shipfitters

              Location-Norfolk, VA

              Pay-discussed during phone interview

              Start-As soon as possible 

              Ability to read and understand marine blueprints

              Must be able to do layouts and fabricate metal structural parts, componets, entire structures

              Must be able to burn and prepare plate and pipe for installation, tack weld and have safety knowledge

              EOE  M/F 


              Must-have Qualifications:

              Must pass fitter test

              Clean background/drug free 

              OSHA 10 & all minimum safety requirements 




              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              CNC PROGRAMMER

              A TEMP-HIRE POSITION

              INDUSTRY: AEROSPACE

              LOCATION: NEWPORT NEWS, VIRGINIA
               

              SUMMARY: 

              • Must be very experienced with CNC machining requirements.
              • 3 years minimum programming required
              • Must be proficient in PRO E / CREO and or MasterCAM programming software (minimum 3 years)
              • Must have background in Machining
              • Able to work from blueprints

               

              EOE M/F

               



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              SHIPYARD SKILLED TRADES

              300 CONTRACT POSITIONS

              INDUSTRY: SHIPYARD

              LOCATION: NEWPORT NEWS, VA

              Pipefitter Helpers            Local Only                        20
              Valve Techs                                                               4
              Machinists - CNC                                                       2
              Machine Operator                                                      1
              Welder Helpers Grinder - Linesman  Local On        15
              Structural Welder                                                      37
              Shipfitters                                                                139        
              Sheetmetal Fillet Welder                                             6
              Pipe Fitters                                                                98
              Blasters                                                                     12
              C7 Blasters                                                                 1 

              .

              EOE M/F 

               


              Must-have Qualifications:



              US Citizenship required.

              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              notices...

              Now you can join our. . .
              Talent Network
              • Sign up for job alert emails
              • Search by location
              • Apply online
              • Submit your resume