One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

MECHANICAL DESIGNER 1: Pro-E and Hydraulics

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $50K - $75K 

 

SUMMARY: 

Will participate in the design and development of mechanical components and systems for use in heavy equipment. Will create new designs as well as designs for product improvement. Seeking local candidates.

 

REQUIREMENTS:

  • Associate degree in Drafting and Design, or 4 years of related experience and/or training, or equivalent combination
  • Must have Pro-E experience and knowledge of Hydraulics
  • 2 years of Pro-E modeling experience in Mechanical Engineering field
  • Experience with AutoCAD
  • Knowledge of Algebra, Geometry and Trigonometry
  • Ability to calculate area, volume, and weight
  • Knowledge of BaaN system, BOM (Bill of Material), and inventory control
  • Able to check drawings

EOE  M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING ENGINEER: EXTRUSION PROCESS

A DIRECT-HIRE POSITION with Excellent Benefits

LOCATION: HAMPTON

SALARY: $85K or higher

 

SUMMARY:

Will be responsible for the manufacturing processes and testing related to flouropolymer extrusions. Provide technical guidance and hands-on expertise to ensure optimal performance. Implement and apply lean principles and techniques utilizing Lean and Six Sigma tools to improve the process and keep cost at a minimum. 

 

REQUIREMENTS:

  • B.S. degree in Mechanical Engineering, Chemical Science, or Manufacturing Engineering
  • 5-7 years of related experience. Must have experience as Manufacturing Engineer.
  • Lean Manufacturing certification a plus
  • Must have plastics industry experience related to high precision extrusion and processing, preferably with fluoropolymers.
  • Experience in one of the following: thermoplastic polymers, film lamination and surface coating.
  • Knowledge of equipment for film extrusions, stretching/orientation equipment, cable braiders and metalizers.
  • Experience with dimensional inspections and related equipment.
  • Knowledge of data acquisition and control systems.
  • Ability to troubleshoot and analyze manufacturing processes and production equipment
  • Lean Manufacturing Practices & Methodologies (Kaizen, 5S, Value Stream Mapping).
  • Knowledge of algebra, trigonometry, calculus and statistics
  • Knowledge of MRP, CAD, IMPACT and process control software
  • Must be US citizen

 

EOE  M/F 

 

 

 

 

 

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

CNC MACHINISTS

2 TEMP-HIRE POSITIONS (after 90 days)

INDUSTRY: AEROSPACE MANUFACTURER 

LOCATION: NEWPORT NEWS

 

 REQUIREMENTS:

  • 10+ years of machining experience
  • Experience with complex set-ups using 3-5 axis CNC mills, lathes and vertical turning lathes
  • Able to calculate and set up controls for regulation of speeds and feeds
  • Must be able to read blueprints and use applied math
  • Able to operate conventional machines as needed
  • Available to work flexible schedule and overtime as needed
  • Must be able to pass criminal background check

Preferred:

  • High tolerance prototype component experience
  • Ability to run multiple machines simultaneously 

 

EOE M/F

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PROGRAMMER: DISTANCE LEARNING COURSE DEVELOPMENT

A CONTRACT POSITION with Temp-Hire Potential

INDUSTRY: GOVERNMENT CONTRACTOR 

LOCATION: NEWPORT NEWS 

PAY RATE: up to $28 per Hour 

 

 REQUIREMENTS:

  • Minimum 3 years of Professional Web front-end development experience
  • Object Oriented Programming design experience
  • Strong knowledge of web technologies, incl. PHP, JQuery, JavaScript and/or TypeScript, HTML5, CSS, XML, AJAX, JSON
  • Experience optimizing multimedia content for the web and mobile devices
  • Ability to write code from scratch and working within Company's existing code base
  • Experience developing web sites that run across multiple browsers (IE, FF, Chrome, and Safari)
  • Experience optimizing web elements for mobile devices
  • Experience developing tracking features in immersive training
  • Knowledge of xAPI learning-technology specifications
  • Will be asked to perform a 30-minute task to demonstrate abilities

 

Preferred Skills:

  • Bachelor's degree in Computer Science or related field
  • VBS2 / VBS3 experience for developing interactive multimedia
  • C# experience to support Oculus Rift and Samsung Gear VR
  • Experience developing immersive training and / or serious games using Augmented Reality, Virtual Reality, or Mixed Reality
  • Game development (graphics, network) a plus

  

EOE M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

INSTRUCTIONAL SYSTEMS DESIGNERS

TEMP-HIRE POSITIONS

SPECIALTY AREA: DoD (ARMY, NAVY or AIR FORCE)

LOCATION: NEWPORT NEWS

PAY RATE: Up to $26 per Hour 

 

BRIEF DESCRIPTION:

Conceptualize and develop training scenarios, tools, aids, curriculums, and other state-of-the-art  technologies related to training and behavioral science. Select the best training requirements to include hardware, software, simulations, assessment, examinations, interviews, computer assisted testing, behavior-based assessment and performance, and team assessment and measurement. Make use of best methodologies in applied psychology, psychometrics, human factors engineering, educational measurement, and related disciplines. Develop and maintain knowledge bases, conduct research methodologies, develop tests, surveys, training materials, statistical analysis. Identify and incorporate new research and development areas.

 

JOB REQUIREMENTS:

  • B.S. or M.S. degree in appropriate field (B.S. or M.S. degree in Instructional Systems Design or Adult Education preferred)
  • 2+ years experience in building instructional systems or building online training
  • Knowledge of ADDIE or SAT methodology
  • Experience developing online courseware in a CLE (Collaborative Learning Environment)
  • Experience developing SCORM-compliant courses
  • Experience complying with Section 508 of the Rehabilitation Act of 1973

 

EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SOFTWARE DEVELOPER

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $70K - $95K 

 

SUMMARY:

Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development.

 

REQUIREMENTS:

  • B.S. degree in Electrical Engineering or Computer Engineering and 2 years of experience in an engineering environment
  • Previous experience with autonomous vehicles / automated vehicle design highly desired
  • Knowledge of software programming tools, e.g. CoDeSys, C++.
  • Knowledge of communication protocols such as RS232, CanOpen, J1939
  • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Experience applying fractions, percentages, ratios, and proportions to practical situations
  • Able to travel within the US and abroad 20% of the time

 

    EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SOFTWARE DEVELOPER, 2-3

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $80K - $110K 

Relocation Assistance Available 

 

SUMMARY:

Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development in an R&D environment.

 

REQUIREMENTS:

  • B.S. degree in Electrical Engineering or Computer Engineering or Master's degree
  • Minimum 4 years of experience in an engineering environment
  • Previous experience with automated vehicle design highly desired
  • Knowledge of software programming tools, e.g. C++, CoDeSys, etc.
  • Knowledge of communication protocols such as RS232, CanOpen, J1939
  • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Experience applying fractions, percentages, ratios, and proportions to practical situations
  • Able to travel within the US and abroad 20% of the time

 

    EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SOFTWARE QUALITY ENGINEER, SR.

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $88K - $110K 

 

SUMMARY:

Will implement quality engineering and control tools and processes for systems used in large underground equipment.

 

REQUIREMENTS:

  • B.S. degree in Computer Engineering or Computer Science
  • 8 years of programming experience in an engineering environment (will consider outstanding candidates with less than 8 years)
  • Knowledge of software languages, e.g. Java, C/C++, etc.
  • Knowledge of scripting languages, e.g. Python, Bash, etc.
  • Automatic code generation tools, e.g. Matlab/Simulink
  • Testing and software validation techniques 
  • Application lifecycle management tools, e.g. DOORS, PTC Integrity, TFS
  • Source control systems (Git, Subversion)
  • Integration server technology
  • Software configuration management tools
  • Able to create software configuration management processes and workflow
  • Knowledge of basic networking and wireless networks
  • Knowledge of software development standards
  • Cybersecurity standards
  • Able to write specs for software functions
  • Agile and Waterfall software development lifecycles
  • V-model methodology

EOE M/F

 

 

 

 

 

    EOE  M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

PRODUCTION PLANNER: STRUCTURAL STEEL MANUFACTURING

A DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RANGE: $55K - $75K

Generous Relocation Assistance is Available. 

 

SUMMARY

Plan, prepare, and issue production schedules for Structural Steel, Heavy Steel manufacturing processes through fabrication, incl. welding. Create master schedule for sequence of each operation to meet shipping dates according to customer orders. Schedule workflow for each department and manufacturing operation. Plan fabrication, paint and assembly sequence to ensure timely completion of production orders. Utilize Logistics and Warehouse software and ERP system and train end users. Utilize nesting software. Read and interpret engineering drawings. Ascertain availability of parts and correct shortages. Assist with managing inventory for fabrication and assembly. Initiate Engineering Change Requests and update Bills of Material. Participate in continuous improvement projects.

 

REQUIREMENTS:

  • B.S. degree and 4 years of related work experience
  • Must have strong Heavy Steel Fabrication experience. Manufacturing Engineer/Planner background
  • Will also consider a Manufacturing Engineer with supply chain concentration, heavy steel/welding, and SAP background
  • Ability to read blueprints
  • Knowledge of weld symbols and bevels.
  • Nesting software required
  • AutoCAD experience or similar
  • Knowledge of inventory software and order processing systems
  • Knowledge of Project Management software, MS Word and Excel spreadsheets
  • Math skills: percentages, circumference, and volume. Knowledge of basic algebra and geometry.
  • Strong oral and written communication skills
  • Knowledge of manufacturing processes such as planning, bill of material, shop floor monitoring, and costing.
  • Experience Enterprise Resource Planning (ERP), Engineering Data Management (EDM), and Warehouse Management System (WMS) a plus
  • AIPICS CPIM certification preferred but not required
  • Up to 10% overnight travel, domestic and international
  • Must be able to obtain valid driver's license and passport
  • Clean background
  • Ability to pass drug test

 

EOE  M/F 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SYSTEMS DEVELOPMENT ENGINEER, Sr.

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY RANGE: $80K - $110K 

Relocation Assistance Available 

 

SUMMARY:

Will research, develop, design, and validate hardware, software, and other components for systems used in large underground equipment. Focus is on automated vehicle design in an R&D environment. 

 

REQUIREMENTS:

  • B.S. degree in Electrical Engineering, Computer Science, or Computer Engineering
  • Minimum 6 years of Systems Engineering and / or software experience in an engineering environment
  • Software programming tools, e.g. Linus, CoDeSys, C++. etc.
  • Communication protocols, e.g. RS232, CanOpen, J1939, etc.
  • Wireless telemetry such as used in surface mining industry
  • Hardware and computing platforms
  • System modeling techniques and software, e.g. Matlab, Simulink
  • Experience with diagnostic tools to verify software function and stability
  • Project Management tools, e.g. MS Project
  • Experience writing specs for software function 

EOE M/F

 

 

 

 

 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

HRIS ANALYST

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  MOBILE, AL

SALARY RANGE: $80K - $90K 

 

SUMMARY:
Provide support for existing HR technology including SAP HRIS; recommend and assist with implementing improvements to HR technologies. Lead the team in the sourcing, development and implementation of new HR technology for the HR department, including design and documentation of HR business processes and systems; in partnership with the IT department. Drive continuous improvement of HR process execution to be efficient, effective and timely; identify new KPIs and monitor existing KPIs to ensure the design, development and implementation of HR process and technology improvement initiatives will achieve desired business results. Develop and maintain relationships with internal/external vendors of HR technology; actively network and participate in benchmarking and best practice development. Provide subject matter expertise and develop recommendations for continuous improvement.

 

REQUIREMENTS:

  • B.S. degree in Human Resources, Management Information Systems, or other relevant discipline 
  • 5 years of progressively responsible HRIS experience
  • Experience with SAP including SuccessFactors preferred
  • Working knowledge in applicable HR processes is required
  • Knowledge of SAP and SuccessFactors is preferred
  • Working knowledge of the relationships between all HR processes and other business units/departments required
  • Advanced knowledge and understanding of Human Resources strategy which includes HR Information Systems, HR tools, technologies, processes, and systems is required
  • Knowledge of organizational systems framework

 

EOE  M/F 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

QUALITY CONTROL ENGINEER

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  MOBILE, AL

SALARY RANGE: $75K - $100K 


SUMMARY:

Create and implement Quality and Inspection training and conduct it on a regular basis. Design, develop, and improve coil inspection and testing procedures.

 

REQUIREMENTS:        

  • B.S. degree in Metallurgy, Materials Science, Industrial, or Chemical Engineering, or equivalent combination of education and experience
  • 5+ years of experience in steel production or quality related field preferred
  • Knowledge of product defects and effects on final product
  • Knowledge of customer processes including forming and stamping
  • Strong knowledge of quality systems and processes     
  • Strong computer skills
  • Training / presentation skills
  • Basic understanding of upstream steelmaking processes
  • Software proficiency with SQL (or other query formats), statistical tools, and data analysis
  • Practical experience working in steel production
  • Basic knowledge of Automotive products and quality standards

 

EOE M/F

 

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SAP (HCM) SPECIALIST

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  MOBILE, AL

SALARY RANGE: $100K - $105K 

 

SUMMARY:
Diagnoses problems and develops and implements solutions in SAP HCM, SAP SuccessFactorsTalent Management, and integration to Mawa Time Clock System and Ceridian Payroll. Understand relevant business processes so that they can be modeled in internal system. Perform highly complex and demanding tasks dealing with the SDLC process which consists of the analysis, design, development, and testing of solutions serving business line and functional units; and its relationship to SAP SolMan.
    

REQUIREMENTS:

  • B.S. degree in Information Technology, or Computer Science or equivalent combination of education and work-related experience
  • 5+ years of experience in SAP configuration and/or implementation
  • Detailed understanding in one of the following SAP component Area SAP HCM and SAP SuccessFactors Talent Management
  • Understanding of Agile Methodology is a plus
  • Experience with SAP HANA, SAP BOBJ, and WorkSoft is a plus
  • Familiarity with ECC architecture
  • Knowledge of SAP maintenance tools  
  • At least one full lifecycle implementation of SAP
  • Knowledge of manufacturing processes in a Steel producer/processor industry or similar manufacturing environment
  • Project management skills (project plan development and tracking, issue resolution, risk mitigation, metrics development and tracking)Outstanding writing and documentation skills
  • Proficiency in MS Office products
  • Excellent analytical, mathematical and creative problem solving skills
     


 EOE M/F

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SILK SCREENER

A TEMP-HIRE POSITION after 90 Days

LOCATION: NEWPORT NEWS, VA

PAY RATE: $11-12 per hour

 

 EOE  M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MAINTENANCE TECHNICIAN: AUTOMATION

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: VIRGINIA BEACH, VA



SUMMARY: 

Ensure proper functioning of mechanical equipment through regular maintenance and troubleshooting of hydraulic and pneumatic assemblies such as valves, pumps, cylinders, ball bearings, etc.. Ensure proper functioning of robots.

 

REQUIREMENTS:

  • Minimum 3 years work-related experience on automated production equipment
  • Journeyman License a plus
  • Ability to read blueprints and schematics to determine method or assembly of parts or machine
  • Ability to perform tool changes
  • Ability to read metric and use measuring tools
  • Must have strong hands-on problem solving skills
  • Able to train operators and work well in a team

 

 EOE M/F 



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

AUTOMATION ENGINEER: CRANES

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  MOBILE, AL

SALARY RANGE: $75K - $100K 


 SUMMARY:

We are seeking an Automation Engineer who will program PLC drives and robotics in Company's efforts of automating all their cranes.

 

 REQUIREMENTS:

  • Bachelor's degree in Information Technology, Computer Science, and/or Engineering or equivalent combination of education and experience
  • 1-5 years of working with programming, robotics, and automation related experience
  • Experience with C++ or .NET Framework, MS SQL Server or Oracle DB, Visual Studio, Windows Server required
  • Communication Socket programming knowledge a plus
  • Understanding of object-oriented programming (OOP) and computer science foundations
  • Experience with equipment / process automation applications in a manufacturing environment a plus
  • Experience with material  handling equipment, especially cranes and conveyor systems a plus
  • Knowledge of OSHA and ASME codes and standards
  • Knowledge with warehouse management systems (WMS) a plus
  • Familiarity with equipment drives, PLC's, Profibus, Profinet, Profisafe, HMI (programming)
  • Cloud-based solutions for data storage retrieval preferred

 

EOE M/F

 

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SAP ABAP CONSULTANT

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  MOBILE, AL

SALARY RANGE: $100K - $105K 

 

SUMMARY:

This is the role of an SAP Technical Specialist who will develop, test, implement, debug, maintain and document ABAP (Advanced Business Application Programming).  

 

 REQUIREMENTS:

  • Bachelor's degree in Management Information Systems, Computer Science, or equivalent combination of education and experience
  • 5+ years of systems experience in ABAP and/or SAP PP module
  • Thorough understanding of ABAP, knowledge of ABAP objects, BADI's, BAPI's, function modules, function groups, etc.
  • Knowledge of SAP ALE and IDOCs, Smartforms, ant data dictionary
  • Detailed understanding of the SAP MM/PP component areas with integration to other modules like CO and SD
  • Project management skills
  • Knowledge and understanding of manufacturing processes
  • Full lifecycle implementation of SAP
  • Knowledge of HANA and integration tools like SAP PI would be a plus
  • Excellent written communication skills

 

EOE M/F

 

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

LOGISTICS MANAGER: Navy Ship Repair

A TEMP-HIRE POSITION, after 90 days

INDUSTRY: SHIP REPAIR

LOCATION: VIRGINIA BEACH

 

SUMMARY: 

Will manage all aspects of Company's logistics organization, incl. logistics product development, project management and staffing, and customer communication. Specific functions include: logistics engineering, material management, warehousing, supply support, training, technical data, and maintenance planning. 

 

REQUIREMENTS:

  • B.S. in Engineering or similar technically related field
  • Minimum 20 years of experience in Logistics, supporting various military customers/programs, incl. the US Navy, and/or the US Coast Guard, and/or the US Army, for ships and/or boats
  • At least 10 years of experience in logistics management.
  • Logistics experience must include systems acquisition and life-cycle support and represent all Integrated Product Support elements
  • In-depth knowledge of logistics product development tools, standards, and processes

 

EOE   M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

SYSTEMS ENGINEER 2: HIL

A DIRECT-HIRE POSITION with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS, VA

SALARY: up to $95K

Relocation Assistance Offered 

 

SUMMARY:

Will research, design, develop, and operate HIL (Hardware In Loop) systems to validate mechanical, electrical, and hydraulic PLC software and related control logic for heavy equipment.

  

REQUIREMENTS:

  • B.S. degree in Computer Engineering, Mechanical Engineering, Electrical Engineering, or Mechatronics
  • 2 years of experience with Hardware In Loop (HIL) system engineering experience in an Engineering environment, or equivalent combination of education and experience
  • Knowledge of HIL system architecture and hardware solutions
  • HIL system software tools such as dSPACE Control Desk, Automation Desk, and Synect
  • Knowledge of embedded systems/PLC for testing and debugging
  • Ability to design and develop plant models, test scenarios, and HIL automation scripts
  • System modeling and Matlab/Simulink experience
  • Ability to create schematics for system operation and design
  • Experience with Project Management software, e.g. MSProject
  • CAD and 3D modeling software, preferably Creo
  • Knowledge of algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
  • Knowledge of fractions, percentages, ratios
  • Excellent communication skills
  • Ability to travel nationally and domestically 20% of the time
  • Must have valid driver's license and ability to obtain passport

 

 

EOE  M/F 

 


 

 

 

        

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

MANUFACTURING ENGINEERS, Entry-Level or Mid-Level

2 DIRECT-HIRE POSITIONS with Excellent Benefits

INDUSTRY: MANUFACTURING

LOCATION:  NEWPORT NEWS, VA

SALARY: $60K - $90K

Generous Relocation Assistance is available 

 

SUMMARY:

Seeking two Mid-Level or Entry-Level Manufacturing Engineers who will participate in all functions in the facility to support the manufacture and assembly of heavy industrial products and the development of processes and equipment for new products and improvement in the overall product delivery system. Will be working in Assembly area, so fastening, root cause analysis, process flows will be important tasks. Will work in a small group setting on diverse projects.

 

 REQUIREMENTS:

  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering or similar discipline
  • 2 yeas of Prior Manufacturing or Plant experience preferred, but will also consider no experience
  • Proficiency in MS Office Products
  • Strong background in Assembly and Fastening operations
  • Knowledge of heavy equipment manufacturing processes
  • Ability to calculate and plan manpower and equipment utilization
  • Able to plan and manage projects and schedule and organize employees and their tasks
  • Able to meet productivity standards
  • Math skills: able to calculate discounts, interest, commissions, percentages, circumference, and volume
  • Apply basic algebra and geometry
  • Must have CAD knowledge/experience to perform tooling drawings
  • ProEngineer or 3D design software knowledge a plus
  • Must have driver's license
  • Able to obtain a passport
  • Able to obtain Safety certification (MSHA hazard training

 

EOE M/F

 

 

 

 

 

 

 

  



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job
Nick Mihalap

about Nick

Nick has over seventeen years' experience in staffing, most of that involving recruiting. He has provided jobs for countless candidates such as craft workers, technical, industrial, and professional. He is a part of an outstanding recruiting team and will do whatever it takes to provide long term work for job seekers. 

contact Nick

11835 Canon Blvd Ste A100
PO Box 12177
Newport News, VA 23612-2177

757.873.5900 | 800.945.9095
fax: 866.597.0055